Abstract:In recent years, there has been a rapid growth in new technologies within nuclear medicine and PET diagnostics, particularly in the field of radiopharmaceutical dose preparation. These advancements are driven by the integration of automatic algorithms into the process. This evolution has brought about significant improvements in the efficiency and accuracy of radiopharmaceutical dose preparation. These automatic algorithms utilize state-of-the-art technologies to streamline the process and ensure precise and tailored doses for patients. The integration of these advanced technologies has revolutionized the field, allowing for more effective and personalized treatment options in nuclear medicine and PET diagnostics. By employing automatic radiopharmaceutical dose dispensers (ARDDs), radiation exposure to technologists is minimized while also mitigating the risk of potential infections for patients. Ionization chambers are currently the most used detectors to measure the activity of radiopharmaceuticals in ARDDs. However, they present certain limitations, including size constraints. This study is part of an international endeavor to develop a new approach for evaluating radiopharmaceutical activity in an ARDD named KAR l 100 . A new approach was used to develop a scintillation detector by linking a PVT detector to a SiPMs array consisting of four elements, each having an active surface of 6 × 6 mm with a bias voltage of 30 V. The detection system's amplified output was then fed to a single-channel analyzer called Enviro, developed by Tema Sinergie S.p.A in Italy. The counts per second (CPS) detected by the detector were studied using WinTAM software allowing for the radionuclide's activity concentration to be read out at run-time. Three widely used medical radioisotopes, 18 F, 11 C and 68 Ga, were used to evaluate the performance of the detector in terms of linearity and repeatability of the measurements. Half-life and linear response were evaluated over a wide range of activities with different decay schemes. Data analysis was conducted, resulting in half-lives of the 18 F, 11 C and 68 Ga radioisotopes of 109.75 ± 0.35, 20.62 ± 0.34 and 67.82 ± 0.25 min, respectively, with calculated deviations of 0.0167%, 1.00% and 0.29% from expected values. The linear response of the detector over the entire range of desired activity concentrations was confirmed after data correction for the detector dead time. Calibration of the detector combined with the dispenser system was carried out in parallel investigations to provide the required device properties for reference applications in nuclear medicine. Furthermore, Monte Carlo simulations using FLUKA code were performed to investigate the contribution of beta particles in addition to gamma radiations to assess the influence of beta particles on the calibration factors. For better accuracy, a shielding was designed to prevent any beta particles from reaching the detector.

Method and equipment for estimation activity nuclides in samples of finite dimensions

An Accurate Method for the Determination of 226ra Activity Concentrations in Soil

Activity estimates of localized gamma emitting radionuclides using a GR-135 survey meter

Development of an appropriate method for measuring gross alpha activity concentration in low-mass size-fractionated samples of sediment using solid-state nuclear track detectors

Dental preceptorships of the 19th century: What were they like?

Measuring gross α and β activity using the μDOSE System

Optimized measurement of radium-226 concentration in liquid samples with radon-222 emanation

Estimation of 241Am and 239Pu activity embedded in the tissue using portable planar HPGe detector

Further development and application of a method for assessing radionuclide surface activity distribution and source location based on measurements of ambient dose equivalent rate

Multi-group approximation, scattering and calibration coefficients, uncertainty estimates and detection limits of a NaI(Tl)-based gamma spectrometry set-up for low-level activity analysis

Primary measurement of massic activity of Am-241 by cryogenic decay energy spectrometery

An instrument for continuous measurement of 220Rn (and 222Rn) using delayed coincidences between 220Rn and 216Po

A Non-Destructive Method To Determine The Depth Of Radionuclides In Materials In-Situ

In-situ quantification of gamma-ray and beta-only emitting radionuclides

An Approach to Measure the Enrichment of 235U by Enrichment Meter Principle Without Knowing the Thickness of Intervening Matter

A rapid method for simultaneously determining activity of 89Sr and 90Sr in a non-equilibrated 90Sr/90Y system without Cerenkov counting

Investigation of Radioxenon Probability Density Functions at IMS Radionuclide Stations Using a Monte Carlo Method for Background Estimation

A technique to quantify very low activities in regions of interest with a collimatorless detector

The worldwide NORM production and a fully automated gamma-ray spectrometer for their characterization

Development of a method to measure trace level of uranium and thorium in scintillation films

A novel method for accurate and real-time quantification of radiopharmaceutical activity in automated dose dispensers