Abstract:At present, most flame retardants, especially halogenated compounds, are banned because of concern for environmental and health issues. In prospect of developing more ecofriendly and effective flame retardants, an alternative solution to develop novel biobased and inorganic flame retardants is addressed. Herein, a nano flame retardant consisting of a lamellar α-zirconium phosphate (α-ZrP) nanosheet modified with chitosan (CH), phytic acid (PA), and a metal ion (Cu<sup>2+</sup>) with a core–multishell structure is fabricated in water solution via a green and facile self-assembly method and applied to enhance the fire retardant effect of poly(vinyl alcohol) (PVA). Thermogravimetric analysis (TGA) demonstrated that after the addition of α@, PVA composites maintained their well-performed ability of char formation. The limit oxygen index (LOI) of pure PVA increased from 18.4 to 29.8% for PVA/α@ and it reached UL-94 V-1 grade. In the microscale combustion calorimeter test (MCC), the peak heat release rate (pHRR) and the total heat release (THR) of PVA/α@ sharply decreased by 82.3 and 62.2% compared with pristine PVA. The results implied that α@ could endow PVA with superior fire retardant properties. Moreover, the research manifested the synergy between α-ZrP and @Cu and a double barrier flame retardant mechanism in a condensed phase. In the α@ flame retardant system, the inorganic α-ZrP nanosheet acted as an insulating core, and the @Cu constituted an intumescent shell, where the outer @Cu intumescent shell formed an expanded char layer serving as the first barrier to hinder heat and oxygen transfer, and then the inner α-ZrP core layer, as the second barrier, would prevent the further exchange of flammable gases and energy between the polymer and fire during combustion. As a result, this ecofriendly nano flame retardant with the core–multishell structure has a potential application value.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c01531?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c01531</a>.XRD patterns of α-ZrP, @Cu, and α@ (Figure S-1); DTG curves of α-ZrP, @Cu, and α@ (Figure S-2); the XRD patterns of char residues of PVA/α-ZrP, PVA/@Cu, and PVA/α@ composites after vertical flame measurement (Figure S-3); the Raman spectrum of the char residues of pure PVA (Figure S-4); TGA data of α-ZrP, @Cu, α@, PVA, and PVA composites in N<sub>2</sub> (Table S-1); MCC data of all samples (standard deviations of three measurements are given in brackets) (Table S-2); flame retardant performance and smoke density of PVA and PVA composites (standard deviations of three measurements are given in brackets) (Table S-3); and the tensile strength of PVA and its composites (standard deviations of three measurements are given in brackets) (Table S-4) (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c01531/suppl_file/an0c01531_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Post-consumer high density polyethylene/zirconium phosphate and aluminum hydroxide composites: Assessment of physico-mechanical and flame retardancy properties

Improving the flame retardancy and mechanical properties of high-density polyethylene-g-maleic anhydride with a novel organic metal phosphonate

Ecofriendly composites based on poly (lactic acid) with nano-zirconium phosphate and nano-zinc oxide/zirconium phosphate: physicochemical and aging characteristics

Mechanical behaviors and flammability of perlite filled recycled high-density polyethylene composites

Creating Sustainable Composites from Pyrolyzed Burlap and Ocean-Recycled Plastics using FDM

Mechanical and morphological characterization of recycled HD-PE bio-composites based on alfa fibers and natural pozzolan

Thermomechanical and Fire Properties of Polyethylene-Composite-Filled Ammonium Polyphosphate and Inorganic Fillers: An Evaluation of Their Modification Efficiency

A Recyclable, Toughening, Extreme-Condition Resistant Flame Retardant for Unsaturated Polyester: Bridging Performance and Sustainability

Sustainable Composites from Waste Polypropylene Added with Thermoset Composite Waste or Recovered Carbon Fibres

Recycling of polyester wastes with bio-based alginate fiber into fire-safety composite

Mechanical enhancement of natural-fiber-reinforced composites modified with recycled thermoset composite fillers

It's not waste, it's a resource: Utilizing industrial waste fibers/mineral fillers to attain flame retardant biocomposites

Effects of Recycled Polyethylene on Natural Rubber Composite Blends Filled with Aluminum Trihydroxide and Polyurethane Waste: Mechanical and Dynamic Mechanical Properties, Flammability

Morphological, Thermal, and Mechanical Assessment of Polypropylene and Ammonium Phosphate Composites Enhanced with Lignosulfonate and Zirconium

Synergistic flame retardant effect of α-zirconium phosphate in low-density polyethylene/ethylene–vinyl acetate/aluminum hydroxide hybrids

Enhanced Flame-retardant Performance of Undervalued Polyethylene Terephthalate Waste as a Potential use in Foamed Materials

A viable strategy to recycle post-used carbon fiber thermoset composites as a multi-functional filler for PP composites

Green Composites Based on Unsaturated Polyester Resin from Recycled Poly(Ethylene Terephthalate) with Wood Flour as Filler—Synthesis, Characterization and Aging Effect

Fabrication and characterization of Zn-hydroxy double salt-loaded composite: Antimicrobial and flame-retardancy properties

Green and Facile Fabrication of α-Zirconium Phosphate-Based Core–Multishell Nanoparticles for Enhancing Fire Retardant Performance of Poly(vinyl alcohol)

Functionalized Cellulose Nanocrystals: A Potential Fire Retardant for Polymer Composites