Abstract:Ni–W–Co alloy is a recently developed single-phase Ni-based alloy with high density. An ultra-high content of W (35–38 wt%) is essential to ensure the high density but unfavorable to possess outstanding ductility or present large deformation. In this study, the flow stress behavior and hot workability of Ni–W–Co alloy were investigated through simulated compression tests with a temperature range of 1000–1300 °C and strain rate range of 0.01–5 s −1 . The Arrhenius-type constitutive equation at peak stress was established. The constitutive equation displays prediction bias due to the lower experimental values at low temperature and high strain rate. The ultra-high solution content of W not only results in the severely inhibited discontinuous dynamic recrystallization (DDRX) and high apparent deformation activation energy (568.5 kJ/mol) but also promotes the generation of subgrain boundaries. Furthermore, continuous dynamic recrystallization (CDRX) occurs during deformation at a low temperature and a high strain rate, which is quite different from the Ni-based alloy with a low W content that only DDRX occurs. The activation of CDRX shortens the stage at which work hardening dominates, and results in lower peak stress values. The prediction bias of the constitutive equation caused by the lower peak stress was eliminated through difference compensation. The hot processing maps at strain values of 0.3, 0.5, 0.7, and 0.9 were constructed. The optimal hot processing parameters of the Ni–W–Co alloy, which aims to obtain full recrystallization microstructure without defects, are strain rate 0.01–0.1 s −1 and temperature 1225–1300 °C in combination with the hot processing maps and microstructure evolution. This study provides a reference for the hot processing and microstructural modification of the novel Ni–W–Co alloy with an ultra-high W content.

Tensile Properties and Deformation Mechanisms of Ni–Co–W Based Superalloy with High γ′ Content

A Molecular Dynamics Study on Mechanical Performance and Deformation Mechanisms in Nanotwinned NiCo-based Alloys with Nano-Precipitates under High Temperatures

Tensile properties and deformation mechanisms of a new Ni–Co base superalloy from room temperature up to 750 °C

Plastic Deformation Behaviors and Mechanical Properties of Advanced Single Crystalline CoNi-base Superalloys

Hot deformation behavior and workability of a Ni–Co based superalloy

The Temperature Dependence of High-Temperature Strength and Deformation Mechanism in a Single Crystal CoNi-base Superalloy

Hot deformation behavior and flow stress modeling of a novel CoNi-based wrought superalloy

Hot deformation behavior of a novel Ni–W–Co high-density Ni-based alloy with ultra-high W content

Microstructure and mechanical properties of a new Ni–Co based superalloy at intermediate temperatures

Effect of γ' phase and microtwins on the microstructural evolution and mechanical properties of a novel Ni–Co base superalloy

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Effect of microstructure on temperature dependence of deformation behavior in polycrystalline CoNi-based superalloy

Temperature-Dependent Mechanical Behaviors and Deformation Mechanisms in a Si-Added Medium-Entropy Superalloy with L12 Precipitation

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

Effects of Al content on microstructures and high-temperature tensile properties of two newly designed CoNi-base superalloys

Hot Deformation Behavior and Recrystallization Mechanism in an As-Cast CoNi-Based Superalloy

Overcoming high-temperature strength-ductility trade-off by combination deformation twinning of C11b and D022 superlattices in a Ni-Cr-W/Mo-based superalloy

High-throughput exploration of alloying effects on the microstructural stability and properties of multi-component CoNi-base superalloys

Hot deformation characteristics and dynamic recrystallization mechanisms of a Co–Ni-based superalloy

Coarse-grained superplasticity of a Ni-Co-based superalloy

Tensile Deformation and Fracture Behavior of Nickel-Based Superalloy DZ951G