Abstract:At Iowa State University’s Center for Nondestructive Evaluation (ISU CNDE), the use of models to simulate ultrasonic inspections has played a key role in R&D efforts for over 30 years. To this end a series of wave propagation models, flaw response models, and microstructural backscatter models have been developed to address inspection problems of interest. One use of the combined models is the estimation of signal-to-noise ratios (S/N) in circumstances where backscatter from the microstructure (grain noise) acts to mask sonic echoes from internal defects. Such S/N models have been used in the past to address questions of inspection optimization and reliability. Under the sponsorship of the National Science Foundation’s Industry/University Cooperative Research Center at ISU, an effort was recently initiated to improve existing research-grade software by adding graphical user interface (GUI) to become user friendly tools for the rapid estimation of S/N for ultrasonic inspections of metals. The software combines: (1) a Python-based GUI for specifying an inspection scenario and displaying results; and (2) a Fortran-based engine for computing defect signal and backscattered grain noise characteristics. The latter makes use of several models including: the Multi-Gaussian Beam Model for computing sonic fields radiated by commercial transducers; the Thompson-Gray Model for the response from an internal defect; the Independent Scatterer Model for backscattered grain noise; and the Stanke-Kino Unified Model for attenuation. The initial emphasis was on reformulating the research-grade code into a suitable modular form, adding the graphical user interface and performing computations rapidly and robustly. Thus the initial inspection problem being addressed is relatively simple. A normal-incidence pulse/echo immersion inspection is simulated for a curved metal component having a non-uniform microstructure, specifically an equiaxed, untextured microstructure in which the average grain size may vary with depth. The defect may be a flat-bottomed-hole reference reflector, a spherical void or a spherical inclusion. In future generations of the software, microstructures and defect types will be generalized and oblique incidence inspections will be treated as well. This paper provides an overview of the modeling approach and presents illustrative results output by the first-generation software.

On the feasibility of ultrasonic full waveform evaluation with changing testing conditions for the quality control of manufacturing parts

Nondestructive Evaluation of Special Defects Based on Ultrasound Metasurface

Evaluation of Pipe Axial Defeat Through the Use of Ultrasonic Guided Wave and Matching Pursuit

High fidelity ultrasonic measurements for defect detection and characterization

Quantitative Comparison of the Total Focusing Method, Reverse Time Migration, and Full Waveform Inversion for Ultrasonic Imaging

Efficient testing of weld seam models with radii of curvature in the millimeter range using laser ultrasound

Spatial and Temporal Deep Learning in Air-Coupled Ultrasonic Testing for Enabling NDE 4.0

Finite element simulation and experimental verification of ultrasonic non-destructive inspection of defects in additively manufactured materials

Non-destructive evaluation of non-uniform stress fields and subsurface stress gradients using ultrasonic waves

Techniques and software tools for estimating ultrasonic signal-to-noise ratios

Continuous baseline update using recurrence quantification analysis for damage detection with guided ultrasonic waves

Detection of defects in metallic specimens supported by ultrasound propagation simulations

Predictions of defect detection performance of air-coupled ultrasonic rail inspection system

Novel Baseline-Free Ultrasonic Lamb Wave Defect Location Method Based on Path Amplitude Matching

High Precision Ultrasonic Measurement Method for Thin-Walled Parts

Model-Based Signal Processing Techniques for Ultrasonic Flaw Detection: Simulation Studies

Validation of Novel Ultrasonic Phased Array Borehole Probe by Using Simulation and Measurement

Non-Destructive Evaluation of Depth of Surface Cracks Using Ultrasonic Frequency Analysis

Nonlinear Ultrasonic Techniques for Testing Micro-Defects in Metal Matrix Composite Structure

Evaluation of Defect Detection in Aluminium, CFRP and Epoxy Resin Plates Using Non-contact Air-Coupled Ultrasonic Waves

Design of Concrete Mock-Ups with Complex Defect Scenarios Using Numerical Simulations