Abstract:The major objective when applying non-destructive testing (NDT) in civil engineering is the detection of defects such as honeycombs. Defects can impair the service life of structures and could lead in the worst case to fatal failures. All structures such as bridges, tunnels, locks etc. are unique objects with variation in geometry, dimensions, materials, environmental condition, load scenarios etc. Thus, the interpretation of NDT data is challenging and the validation of the NDT method, the training of inspectors and the reliability analysis of NDT rely on mock-ups with known defect situations mimicking the type of defect as realistic as possible. The considered defect sizes inside the mock-ups should cover the transition zone between detectable and non-detectable to properly evaluate the capability of the inspection system. However, knowledge about the limits of an inspection system is mostly non-existent. To overcome this limitation, this study applies realistic numerical simulations for ultrasonic testing in reinforced concrete performed with the elastodynamic finite integration technique (EFIT) to identify this transition zone. First, the study shows the development and the validation of a numerical representation of concrete considering the implementation of a qualitatively realistic noise level. Additionally, the accurate representation of the sources during ultrasonic testing is confirmed by an investigation of the radiation characteristic for dry point contact ultrasonic transducers. The simulation outcome enabled the design of a mock-up, which explores the detection limits for honeycombs during ultrasonic testing under different boundary conditions. A case study demonstrates the applicability of the design scheme based on numerical simulation. In the real specimen designed with the assistance of numerical simulations, of the implemented defects are detectable, proving the effectiveness of the design methodology.

Detection of defects in metallic specimens supported by ultrasound propagation simulations

Nondestructive Evaluation of Special Defects Based on Ultrasound Metasurface

Detecting features of defect metal based on laser ultrasonic technique

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Evaluation of Pipe Axial Defeat Through the Use of Ultrasonic Guided Wave and Matching Pursuit

Fully Noncontact Hybrid NDT for 3D Defect Reconstruction Using SAFT Algorithm and 2D Apodization Window

Laser Ultrasound Inspection Based on Wavelet Transform and Data Clustering for Defect Estimation in Metallic Samples

Predictions of defect detection performance of air-coupled ultrasonic rail inspection system

A magnetoelectric-ultrasonic multimodal system for synchronous NDE of surface and internal defects in metal

High fidelity ultrasonic measurements for defect detection and characterization

A Systematic Review of Ultrasonic Techniques for Defects Detection in Construction and Building Materials

Evaluation of Defect Detection in Aluminium, CFRP and Epoxy Resin Plates Using Non-contact Air-Coupled Ultrasonic Waves

A Through-Transmission Ultrasonic Method for the Detection of Ferrite Tile Defects

On the feasibility of ultrasonic full waveform evaluation with changing testing conditions for the quality control of manufacturing parts

Design of Concrete Mock-Ups with Complex Defect Scenarios Using Numerical Simulations

Modeling Defects in Ultrasonic Nondestructive Testing: State-of-the-Art and Prospects

Acoustic field simulation-based ultrasonic water immersion non-destructive testing for titanium alloy plate

Nondestructive Testing of Composite Materials: An In-Depth Study Using Ultrasonic Immersion Inspection

Localization of Material Defects Using Nonlinear Resonant Ultrasound Spectroscopy under Asymmetric Boundary Conditions

A Defect Detection Method for the Surface of Metal Materials Based on an Adaptive Ultrasound Pulse Excitation Device and Infrared Thermal Imaging Technology

Enhancing Time-of-Flight Diffraction (TOFD) Inspection through an Innovative Curved-Sole Probe Design