Abstract:To meet the demands of high-temperature usage and weight reduction in aerospace engineering, Au-Ni solder is commonly employed for dissimilar joining of Ti3Al-based alloys and Ni-based high-temperature alloys. However, the interaction between Ti and Ni results in the formation of brittle phases such as Ti 2 Ni, TiNi, and TiNi 3 , leading to diminished mechanical properties of the joint and potential formation of sensitive cracks during welding. Previous research has indicated that doping with Pd enhances the mechanical properties of the joint's central region due to its strong affinity. Nevertheless, conventional experimental methods struggle to observe the microstructure of the Au-Ni-Pd solid solution phase and analyze its interface strengthening mechanism. This study employs first principles calculations based on density functional theory to assess the stability of the Au-2.0Ni-MPd (M = 0, 0.25, 0.5, 0.75, 1.0, 1.25, 1.5, 1.75, 2.0) alloy. The mechanical and thermal properties were assessed. The results indicate that the anisotropy of the Au-2.0Ni-MPd alloy is minimized when M is 0.5 wt.%, suggesting that 0.5 wt.% Pd effectively enhances the stability of the alloy. Specifically, when the Pd content is below 0.5 wt.%, it demonstrates higher dislocation strain energy (2.713 J m −1 ). Furthermore, Au-2.0Ni-0.5Pd exhibits high hardness (2.629 GPa) and good toughness (Cauchy pressure = 41.796 GPa, ν = 0.364), satisfying the mechanical property requirements for brazing joints. Thermodynamic calculations demonstrate that the addition of Pd enhances the specific heat capacity of the alloy under constant volume and pressure conditions at high temperatures. The analysis of the volume–temperature and Debye temperature curves reveals that the Au-2.0Ni-0.5Pd alloy demonstrates the lowest volume change rate (8.1%) and Debye temperature slope (− 0.019) at high temperatures, suggesting reduced sensitivity to temperature fluctuations and enhanced high-temperature resistance and thermal shock fracture resistance due to Pd addition in the Au-2.0Ni material. The results demonstrate that the mechanical and thermal properties of Au-2.0Ni solder are most effectively enhanced by 0.5 wt.% Pd. This study offers theoretical guidance for further applications of Au-Ni solder in aerospace engineering.

Strength, Hardness, and Ductility Evidence of Solid Solution Strengthening and Limited Hydrogen Embrittlement in the Alloy System Palladium-Copper (Cu wt. % 5–25)

Effects of Palladium Content on the Properties and High-Humidity Reliability of Silver Alloy Wires

Material performance of age-hardened beryllium–copper alloy, CDA-C17200, in a high-pressure, gaseous hydrogen environment

Brittleness in Copper and Copper Alloys With Particular Reference to Hydrogen Embrittlement

Enhancement of hydrogen embrittlement resistance in a Fe-18Mn-0.6C twinning induced plasticity steel by copper alloying

High temperature characteristics and solidification microstructures of dental metallic materials part I: silver-palladium-copper-gold alloy

Optimizing the hydrogen embrittlement resistance by Cu addition in a low carbon high strength steel

Resistivity testing of palladium dilution limits in CoPd alloys for hydrogen storage

Determination of hydrogen compatibility for Cu-Al-Ni-Fe-Mn cast alloys prepared by varying Al and Ni contents

Effect of Hydrogen Charging on the Mechanical Properties of High-Strength Copper-Base Alloys, Austenitic Stainless Steel AISI 321, Inconel 625 and Ferritic Steel 1.4511

Additive Manufacturing and Precipitation Hardening of Low-Alloyed Copper Alloys Containing Chromium and Hafnium

Analyzing the Precipitation Effects in Low-Alloyed Copper Alloys Containing Hafnium and Chromium

The Effect of Copper on the Microstructure, Wear and Corrosion Resistance of CoCrCuFeNi High-Entropy Alloys Manufactured by Powder Metallurgy

Effect of copper addition on mechanical properties and microstructures of LM25 cast alloys

Exceptional strength-ductility synergy achieved by spinodal decomposition in a high Cu content high-entropy alloy

Hydrogen-enhanced microbanding in an austenitic FeMnAlC low-density steel: Effect on hydrogen embrittlement resistance

Diffusion and reaction behavior of palladium coating and copper matrix prepared using a halogen-free direct coating process

First principles calculation of the effect of Pd doping on the mechanical and thermodynamic properties of Au-2.0Ni solder

Hydrogen trapping and embrittlement in high-strength Al alloys

Precipitates-Strengthened Cu-Ni-Si-Fe Conductive Copper Alloy

Mechanical Properties of Cu70Fe30 (at%) Bulk Metastable Alloys Prepared by Mechanical Alloying and Spark Plasma Sintering