Abstract:A previous study on quenching and partitioning (QP) steel showed that the transformation-induced plasticity (TRIP) effect strongly depends on the stress triaxiality and Lode angle parameters during the plastic deformation. However, only the impact of stress states on the linear hardening response (first-order effect) was investigated, assuming its yield and plastic flow evolution (second-order effect) follow isotropic behavior for both tension and compression. The high-order effects of phase transformation on plasticity are still elusive and difficult to incorporate owing to the inconsistent usage of the equivalent strain in kinetics law and constitutive modeling. In this study, the hardening law, considering martensitic transformation, was utilized in conjunction with a strength differential (SD) effect-induced asymmetric yield function based on the proposed work-conjugate framework. The contradiction where the previous model correlates the martensitic transformation law based on the von Mises strain and the mechanical responses based on the normalized plastic work-per-unit material (or the work-conjugate equivalent strain) was eliminated. This elimination imposed the phase transformation influence into size evolution of the yield surface for QP980 because the effective stress directly correlated with the martensitic transformation using the work-conjugate equivalent strain. One can use any yield function in conjunction with this work-conjugate framework to correlate the martensitic transformation and its impact on the mechanical behavior for both first- and second-order effects. Thus, the yield surface of QP980 steel was stably normalized through asymmetric function under different plastic strains and deformation modes. The SD effect of QP980 steel has proven to be anisotropic and the martensitic transformation has negligible impact on the shape evolution of its yield surface. The pressure-dependent phenomenon in the plastic flow behavior of the employed QP steel suggested that its volume change during the plastic deformation can be neglected. The correlation between the microstructure volume fraction, evolving yield surface, and the stress–strain response under nonlinear loadings (Bauschinger effect) was predicted accurately. The forming limit imperfection analysis served as a typical application, where the phase transformation was further correlated with the localized necking phenomenon. The framework to understand the impact of microstructure evolution in QP steel sheets on its final forming limits was provided, suggesting that an optimized strain path design will greatly enhance the accumulated plastic limit before the localized necking.

Prediction and experimental verification of phase transformation plasticity

A Multi-Phase Model for Transformation Plasticity Using Thermodynamics-Based Metallurgical Algorithm

Research on Modelling of Transformation Plasticity Via Dilatometric Tests

Simulation of Mechanical Behavior of Multiphase TRIP Steel Taking Account of Transformation-Induced Plasticity

Computational integration and experimental validation of a two-length scale model for accurate prediction of steels' plastic behavior during phase transformation

Phase transformation and plastic behavior of QP steel sheets: Transformation kinetics-informed modeling and forming limit prediction

Experimental Research of Transformation Plasticity for Q460D Steel

Experimental and Numerical Study on Strain Path and Crystal Orientation Dependences of Phase Transformation Behaviors of QP1180 Steel

Accurate Prediction of Welding Stress Evolution by Considering Improved Phase Transformation Model

Overall Stress–strain Relationship of Cold Rolled Transformation Induced Plasticity Multiphase Steels

Experimental Analysis of Transformation Induced Plasticity in 9cr1mo Steel

Modelling of Q&P Steel Heat Treatment Process Based on Finite Element Method

Theory and Modeling of Phase Transformations under Stress in Steel

A novel crystal plasticity model incorporating transformation induced plasticity for a wide range of strain rates and temperatures

Prediction of Martensitic Transformation and Deformation Behavior in the TRIP Steel Sheet Forming

A theoretical and numerical approach to the plastic behaviour of steels during phase transformations—II. Study of classical plasticity for ideal-plastic phases

Influence of Transformation Plasticity on the Distribution of Internal Stress in Three Water-Quenched Cylinders

Experimental extract of transformation plastic strain duringphase transformation

Prediction of Mechanical Behaviors of the Q&P980 Steel under Different Temperatures and Strain Rates Using Crystal Plasticity Method

Mechanisms of strength–plasticity enhancement and stress-induced phase transition in a medium-carbon low-alloy steel

Analysis of Phase Transformation Simulation and Prediction of Phase Distribution in High Strength Steel in Hot Stamping