Abstract:Conventional silicon photomultipliers (SiPMs) are well established as light detectors with single-photon-detection capability and used throughout high energy physics, medical, and commercial applications. The possibility to produce single photon avalanche diodes (SPADs) in commercial CMOS processes creates the opportunity to combine a matrix of SPADs and an application-specific integrated circuit in the same die. The potential of such digital SiPMs (dSiPMs) is still being explored, while it already is an established technology in certain applications, like light detection and ranging (LiDAR). A prototype dSiPM, produced in the LFoundry 150-nm CMOS technology, was designed and tested at DESY. The dSiPM central part is a matrix of 32 by 32 pixels. Each pixel contains four SPADs, a digital front-end, and has an area of 69.6 $\times$ 76 um$^2$. The chip has four time-to-digital converters and includes further circuitry for data serialization and data links. This work focuses on the characterization of the prototype in an electron beam at the DESY II Test Beam facility, to study its capability as a tracking and timing detector for minimum ionizing particles (MIPs). The MIP detection efficiency is found to be dominated by the fill factor and on the order of 31 %. The position of the impinging MIPs can be measured with a precision of about 20 um, and the time of the interaction can be measured with a precision better than 50 ps for about 85 % of the detected events. In addition, laboratory studies on the breakdown voltage, dark count rate, and crosstalk probability, as well as the experimental methods required for the characterization of such a sensor type in a particle beam are presented.

Beam diagnostics with silicon pixel detector array at PADME experiment

Characterization of the PADME positron beam for the X17 measurement

Design and performance of the front-end electronics of the charged particle detectors of PADME experiment

Status and Prospects of PADME

Characterization and Performance of PADME's Cherenkov-Based Small-Angle Calorimeter

First results on the performance of the PADME electromagnetic calorimeter

Performance assessment of the HERD calorimeter with a photo-diode read-out system for high-energy electron beams

Resonant search for the X17 boson at PADME

Test beam results of a Cylindrical GEM detector for the BESIII experiment

The ENUBET positron tagger prototype: construction and testbeam performance

Beam Test Studies of 3D Pixel Sensors Irradiated Non-Uniformly for the ATLAS Forward Physics Detector

arXiv : Test beam results of a Cylindrical GEM detector for the BESIII experiment

Beam Verification of the Large Dynamic Range Readout Design of DAMPE-PSD

Test beam results of a Cylindrical GEM detector for 1 the BESIII experiment

Test Beam Characterization of a Digital Silicon Photomultiplier

Beam test of n-type Silicon pad array detector at PS CERN

Performance of the new RD51 VMM3a/SRS beam telescope---studying MPGDs simultaneously in energy, space and time at high rates

Lifetime and performance of the very latest microchannel-plate photomultipliers

PARSIFAL: a toolkit for triple-GEM parametrized simulation

Characterization of LAPPD timing at CERN PS testbeam