Abstract:The optimization of secondary phase in thermoelectric(TE) materials can {helps in improvisation of material's efficiency}. Being a potential {contender} for lower temperature TE application, bismuth telluride(Bi$_2$Te$_3$) nanoparticles were synthesized via different routes and profiles to optimize their pure single phase. Systematic characterizations were performed with the help of X-ray diffraction (XRD), Rietveld refinement and field effect-scanning electron microscopy(FE-SEM) for structural and morphological behavior, while TE properties such as Seebeck coefficient, electrical conductivity and power-factor were measured for the purest sample chosen. Rietveld refinement in the XRD pattern of the samples revealed that only a small amount ($\sim$ 1.6\%) of Bi$_2$Te$_3$ was formed in co-precipitation method, while the hydrothermal technique increases this phase with increment in synthesis duration. This work focused on the phase evolution of Bi$_2$Te$_3$ with increasing synthesis duration time at constant temperature and vice-versa. XRD and Rietveld refinement revealed that the hydrothermal technique (150 $^\circ$C for 48 hours) can synthesize purest samples (84\% Bi$_2$Te$_3$ phase in this case). {FE-SEM and Energy Dispersive X-ray analysis unveiled that the impure phases in the system {were} quantitatively reduced, and it supported by decline in atomic percentage of oxygen from 37\% to 11\%, in addition to this, it was also found that particle size was also decreased with increase in temperature.} The observed electrical conductivity of the chosen sample is $\sim$20 times greater, while Seebeck coefficient is $\sim$3 times lower than that of pure Bi$_2$Te$_3$ phase. The detailed analysis has generalized the growth mechanism in Bi$_2$Te$_3$ phase evolution by the diffusion of Bi into Te nanorods to fabricate hexagonal Bi$_2$Te$_3$.

Comprehensive study of nanostructured Bi 2 Te 3 thermoelectric materials – insights from synchrotron radiation XRD, XAFS, and XRF techniques

Development of Nanostructured Bi2Te3 with High Thermoelectric Performance by Scalable Synthesis and Microstructure Manipulations

Synthesis and Characterization of Bi2Te3 Nanostructured Thin Films

Investigating Phase Transition and Morphology of Bi-Te Thermoelectric System

Effect of solvent on the microstructures of nanostructured Bi 2Te3 prepared by solvothermal synthesis

Synthesis and Thermoelectric Properties of Bi2te3 Based Nanocomposites

A review on bismuth telluride (Bi2Te3) nanostructure for thermoelectric applications

Solvothermal synthesis of nanostructured Bi_2Te_3 based thermoelectric materials

Nanostructuring and improved performance of ternary Bi–Sb–Te thermoelectric materials

Electronic Structure and Thermoelectric Properties of Bi2Te3 Crystals and Graphene-Doped Bi2Te3

Sonochemical Synthesis of Nanocrystalline Bi2Te3 Thermoelectric Compounds

Enhanced Thermoelectric Performance of Bi2Te3 Based Graphene Nanocomposites

Enhanced Thermoelectric Properties of N-Type Bi2te3-Based Nanocomposite Fabricated by Spark Plasma Sintering

Enhanced Thermoelectric Performance of GeTe-Based Composites Incorporated with Fe Nanoparticles

High-performance Nanostructured Thermoelectric Materials

Enhanced figure of merit in nanostructured (Bi, Sb) 2 Te 3 with optimized composition, prepared by a straightforward arc-melting procedure

Revisiting the Reduction of Thermal Conductivity in Nano- to Micro-Grained Bismuth Telluride: The Importance of Grain-Boundary Thermal Resistance

Synthesis and thermoelectric characterization of Bi2Te3 nanoparticles

Achieving High Thermoelectric Performance Through Constructing Coherent Interfaces and Building Interface Potential Barriers in N-Type Bi2Te3/Bi2Te2.7Se0.3 Nanocomposites

Bulk Nanocrystalline Thermoelectrics Based on Bi-Sb-Te Solid Solution

Effect of Co-Doping on Thermoelectric Properties of n-Type Bi2Te3 Nanostructures Fabricated Using a Low-Temperature Sol-Gel Method