Abstract:The existing models of proton-exchange membrane fuel cells, such as computational fluid dynamics and lumped-parameter models, cannot provide a comprehensive description of mass-transport mechanisms without incurring a high computational load. This paper proposes a reduced-dimension dynamic model of fuel cells that considers main mass-transport mechanisms, including two-phase flow in the gas diffusion layer. Under the quasi-steady-state assumption, the distributions of liquid water and gas species in the through-plane direction are calculated through analytical expressions. Thus, the reduced-dimension fuel-cell model can obtain a similar output to a one-dimensional model without needing to solve partial differential equations. The reduced-dimension model was validated on steady state and transient experimental data. The computational load of the reduced-dimension model was only 1/60 that of a one-dimensional model. To simulate the transient behavior of the fuel-cell system, the reduced-dimension fuel-cell model was integrated with a comprehensive balance-of-plant model. The system model could execute long-time-scale transient simulations and evaluate the internal states of the fuel cell while minimizing the computing resources. Finally, the contradiction between the power response rate and oxygen starvation under the load-delay strategy was analyzed with the system model, and the delay duration was optimized. Results verify the potential of the reduced-dimension model in control-oriented applications. Novelty statement The existing models of proton-exchange membrane fuel cells, such as computational fluid dynamics and lumped-parameter models, cannot provide a comprehensive description of mass-transport mechanisms without incurring a high computational load. This work proposes a reduced-dimension dynamic model of fuel cells that considers main mass-transport mechanisms, including two-phase flow in the gas diffusion layer. Under the quasi-steady-state assumption, the distributions of liquid water and gas species in the through-plane direction are calculated through analytical expressions. Thus, the reduced-dimension fuel-cell model can obtain a similar output to a one-dimensional model without needing to solve partial differential equations. The computational load of the reduced-dimension model was only 1/60 that of a one-dimensional model.

Integrated model for accurate internal state estimation of polymer electrolyte membrane fuel cells

A three-dimensional PEM fuel cell model with consistent treatment of water transport in MEA

A single-phase, non-isothermal model for PEM fuel cells

A 1 + 1-D Multiphase Proton Exchange Membrane Fuel Cell Model for Real-Time Simulation

Simulation of Water Transport in Proton Exchange Membrane Fuel Cell Using a One-dimension Model

A Coupled CFD Model for an Accurate and Fast Prediction of the Unsteady Operation Process of a Proton Exchange Membrane Fuel Cell

Towards Reliable Prediction of Performance for Polymer Electrolyte Membrane Fuel Cells via Machine Learning-Integrated Hybrid Numerical Simulations

Advanced Methodology for Simulating Local Operating Conditions in Large Fuel Cells Based on a Spatially Averaged Pseudo-3D Model

Modeling and performance investigation on the deformed gas diffusion layer of PEM fuel cell

Study of Internal Multi-Parameter Distributions of Proton Exchange Membrane Fuel Cell with Segmented Cell Device and Coupled Three-Dimensional Model

A Reduced‐dimension Dynamic Model of a Proton‐exchange Membrane Fuel Cell

A Dynamic Tanks-in-Series Model for a High-Temperature PEM Fuel Cell

Multiphysical, Multidimensional Real-Time PEM Fuel Cell Modeling for Embedded Applications

A Numerical Model of a Liquid-Feed Solid Polymer Electrolyte DMFC and Its Experimental Validation

Illustrative Case Study on the Performance and Optimization of Proton Exchange Membrane Fuel Cell

Modeling of Membrane Electrode Assembly of PEM Fuel Cell to Analyze Voltage Losses Inside

Dynamic Simulation of a Fuel Cell Bus: Investigating Inner States of Water Content, and Water Saturation in Different Layers

Numerical analysis of catalyst agglomerates and liquid water transport in proton exchange membrane fuel cells

Analytical Calculation and Evaluation of Water Transport Through a Proton Exchange Membrane Fuel Cell Based on a One-Dimensional Model

Model-based estimation of liquid saturation in cathode gas diffusion layer and current density difference under proton exchange membrane fuel cell flooding

Unsteady 3D-CFD Simulation of a Large Active Area PEM Fuel Cell under Automotive Operation Conditions—Efficient Parameterization and Simulation Using Numerically Reduced Models