Mouldable Conductive Plastic with Optimised Mechanical Properties

Arfat Anis,Abdullah Alhamidi,Zahir Bashir,Mohammad Asif Alam,Saeed M. Al-Zahrani

DOI: https://doi.org/10.3390/polym16030311

IF: 5

2024-01-24

Polymers

Abstract:This paper investigates making an injection mouldable conductive plastic formulation that aims for conductivity into the electromagnetic interference (EMI) shielding range, with good mechanical properties (i.e., stiffness, strength, and impact resistance). While conductivity in the range (electrostatic charge dissipation) and EMI shielding have been attained by incorporating conductive fillers such as carbon black, metals powders, and new materials, such as carbon nanotubes (CNTs), this often occurs with a drop in tensile strength, elongation-to-break resistance, and impact resistance. It is most often the case that the incorporation of high modulus fillers leads to an increase in modulus but a drop in strength and impact resistance. In this work, we have used short carbon fibres as the conductive filler and selected a 50/50 PBT/rPET (recycled PET) for the plastic matrix. Carbon fibres are cheaper than CNTs and graphenes. The PBT/rPET has low melt viscosity and crystallises sufficiently fast during injection moulding. To improve impact resistance, a styrene-ethylene-butadiene-styrene (SEBS) rubber toughening agent was added to the plastic. The PBT/rPET had very low-impact resistance and the SEBS provided rubber toughening to it; however, the rubber caused a drop in the tensile modulus and strength. The short carbon fibre restored the modulus and strength, which reached higher value than the PBT/rPET while providing the conductivity. Scanning electron microscope pictures showed quite good bonding of the current filler (CF) to the PBT/rPET. An injection mouldable conductive plastic with high conductivity and raised modulus, strength, and impact resistance could be made.

polymer science

What problem does this paper attempt to address?

### What problem does this paper attempt to solve?

This paper aims to develop an injection-moldable conductive plastic formulation that not only possesses the conductivity required for electromagnetic interference (EMI) shielding but also exhibits good mechanical properties such as stiffness, strength, and impact resistance. Although conductivity and EMI shielding can be achieved by adding conductive fillers like carbon black, metal powders, and carbon nanotubes, these fillers often lead to a decrease in the material's tensile strength, elongation at break, and impact resistance.

Specifically, the paper selects short carbon fibers as the conductive filler and uses a 50/50 ratio of polybutylene terephthalate (PBT) and recycled polyethylene terephthalate (rPET) as the plastic matrix. Compared to carbon nanotubes and graphene, carbon fibers are more cost-effective and less prone to agglomeration. Additionally, to improve impact resistance, styrene-ethylene-butylene-styrene (SEBS) rubber toughener is added to the plastic. The study finds that short carbon fibers not only restore the modulus and strength lost due to the addition of rubber but also impart higher conductivity to the material. Scanning electron microscope images show good bonding between the carbon fibers and the PBT/rPET matrix.

In summary, the main objective of this paper is to develop an injection-moldable conductive plastic that has both high conductivity and excellent mechanical properties.