Effects of laser-arc hybrid welding on microstructure and mechanical properties of dissimilar steel joint
Shoubing Yang,Dongxu Wang,Li Yang,Fulong Zhang,Chi Zhang,Bin Zhou,Chaojie Liu,Genzhe Huang
DOI: https://doi.org/10.1016/j.ijleo.2022.169795
IF: 3.1
2022-10-01
Optik
Abstract:Laser-arc hybrid welding can improve production efficiency, and thus, it is being used in an increasing number of industries. Herein, the effects of laser-arc hybrid welding process parameters on the microstructure and mechanical properties of welded joint of low- and medium-carbon steels were investigated. Welding seam with best quality and no defects was obtained at welding current, arc voltage, laser power, and welding speed of 260 A, 24.8 V, 3300 W, and 0.8 m/min, respectively. Moreover, the enrichment of Mn in the weld zone promoted bainite formation. Rapid cooling led to the pseudo-eutectic phenomenon in the heat-affected zone (HAZ) on both sides of the weld; therefore, when an HAZ was closer to the weld on both sides, the pearlite content was higher. For low-carbon steel, the microstructure of the HAZ comprised ferrite, pearlite, and ferrite widmanstatten. For medium-carbon steel, the microstructure of the HAZ comprised a large amount of pearlite and a small amount of ferrite. In welded joint of both types of steels, differences in microstructure and internal stress altered the nanostructure morphology and distribution characteristics of cementite. The welded joint also had considerably better tensile strength due to a large number of dislocations and better grain refinement, which led to tensile fractures in the base metal zone of low-carbon steel. For a prefabricated weld notch, the tensile fracture mode was a ductile fracture with massive dimples.
optics