Abstract:Using 20L explosion vessel, the present research work reports some experimental results which elucidate the effects of dust concentration, particle size and specific surface areas on aluminum dust explosion severity. Dust flame propagation property and explosion products were analyzed systemically. Six kinds of aluminum powders with different size distributions were selected and specially prepared for explosion tests. Results show that explosion parameters present an increasing and then decreasing trend with dust concentrations. The optimum explosion concentrations for all the selected aluminum dusts are similarly equal to 500g/m3. Maximum explosion pressures would be quadratic correlated with the decreasing of particle size. However, (dP/dt)max would be exponentially increasing with particle size decreasing. Aluminum dust flame propagation speed would be increased and the combustion mechanism would be transited from diffusion-controlled mode to kinetically controlled mode with particles diameter decreasing. For the finer dust cloud (dS less than 10μm), dust flame propagation speed would be exponential increased with dust concentration. However, there is a power function relation between flame propagation speeds and dust concentration for the coarse aluminum dust cloud (dS larger than 10μm). At the experimental condition, flame propagation speed presents an exponentially decreased trend with the increasing of particle size. Explosion products obtained at different conditions present different apparent morphology. The higher explosion pressure, the finer explosion fragments and nano-scale spherical structure would be produced. For coarse aluminum particles, explosion products present fluffy flocculent structure. Furthermore, alumina produced under lower explosion pressure conditions are mainly γ-Al2O3 components. Under high explosion pressure condition (such as 0.56MPa), there are notable bulges corresponding to α-Al2O3 are produced. Present research results may have important significance for understanding the explosion mechanism of aluminum-air dust/air cloud.

Study on the effect of particle morphology on transient dispersion behavior and ignition of Al Mg alloy powder

Flame propagation behaviours and explosion characteristics of AlMg alloy dust based on thermodynamic analysis

Flame Propagation Behaviours and Explosion Characteristics of Al Mg Alloy Dust Based on Thermodynamic Analysis

Explosion severity of micro-sized aluminum dust and its flame propagation properties in 20 L spherical vessel

Analysis of dispersion behavior of aluminum powder in a 20 L chamber with two symmetric nozzles

Explosion suppression flame and mechanism of energetic dust with distinct morphologies: Aluminum-containing metal as a typical

Ignition sensitivity and explosion behaviors of micron-sized aluminum powder: Comparison between flake aluminum powder and spherical aluminum powder

Flame propagation behaviors and temperature distribution characteristics of magnesium dust clouds with different particle size polydispersities

Effects Investigation of Particle Size and Concentration on the Ignition, Explosion Characteristics, and Behavior of Flame Propagation in TC4 Titanium Alloys

Minimum Ignition Temperatures and Explosion Characteristics of Micron-Sized Aluminium Powder

Study on the effects of confined space opening pressure and ignition energy on the explosion flame of AlSi10Mg dust

Exploring the Combustion Mechanism of Single Micron-Sized Aluminum Particles with a Numerical Model

Study on Electrical Explosion Mechanism and Ignition Characteristics of Copper and Aluminum Powder under Ignition Solid Propellant

Study on transient reaction mechanism and explosion intensity parameters of micron-sized flake aluminum dust in air

Effects of Particle Thermal Characteristics on Flame Microstructures During Dust Explosions of Three Long-Chain Monobasic Alcohols in A Half-Closed Chamber

Influence of micron-sized aluminum particles on micro-explosion and combustion characteristics of ethanol-biodiesel droplets under co-heat flow

Study on the Transformation of Combustion Mechanism and Ejection Phenomenon of Aluminum Particles in Methane Flame

Effect of Mass Ratio on Flame Propagation Behaviors and Thermal Radiation Performance of Al–AlH3 Composite Dust

Effect of metal dust fuel at a low concentration on explosive/air explosion characteristics

Energy output characteristics and safety design of Al-AlH 3 composite dust for energetic material additive

Study on laser ignition and combustion characteristics of micron-sized aluminum and Al-Mg alloys particles