Abstract:This study investigated the behavior and temperature of condensed combustion products (CCPs) in a magnesium–water vapor flame. The experiments were conducted using magnesium plates with a surface area of 5 × 5 mm 2 and an oxidizer pressure in the range of 10–100 kPa, in consideration of potential applications in microspacecraft. Compared with the air and oxygen cases, a substantial quantity of white residue remained around the fuel when the oxidizer was water vapor. Scanning electron microscopy revealed that this was deposited by submicron CCPs formed in the flame. Additionally, the laser light extinction method revealed the spatial distribution of the CCP. In the case of water vapor, the point of maximum CCP density was closer to the fuel than to the oxygen, which caused a difference in residue formation. Next, the temperature of the CCP in the combustion flame was calculated using Planck’s law with a spectrometer. This study utilized six types of emissivity indices, ranging from 0 to -4, for power fitting. A more plausible temperature range was determined using the coefficient of determination, leading to an uncertainty of 20% in the temperature calculation using Planck’s law. The observed temperature was approximately 600 K lower for water vapor than for oxygen, a discrepancy exceeding the difference predicted by the adiabatic flame temperatures. The two-dimensional temperature distribution was measured with CCD cameras using the two-color pyrometer method, and the distance to the point of maximum reaction temperature was shorter for water vapor than for oxygen. This study concluded that the decrease in the reaction distance in the water vapor case owing to the lower temperature significantly influenced the spatial distribution of CCPs within the flame. Novelty and significance statement: The present study is novel in that the condensed combustion products in a magnesium flame were identified, and their temperature was measured distinctly from the fuel. These observations explain why the oxide residue accumulated only in water vapor cases. Our research stands out, recognizing the limited experimental forays into magnesium combustion with pure water vapor. The combustion research on these materials, which are safe and obtainable from space bodies, has profound implications for advancing space propulsion and energy.

Flame propagation behaviors and temperature distribution characteristics of magnesium dust clouds with different particle size polydispersities

Flame propagation behaviours and explosion characteristics of AlMg alloy dust based on thermodynamic analysis

Study on the effect of particle morphology on transient dispersion behavior and ignition of Al Mg alloy powder

Effect of particle size polydispersity on the minimum ignition temperature of PMMA dust clouds

Explosion severity of micro-sized aluminum dust and its flame propagation properties in 20 L spherical vessel

Dimensional scaling of flame propagation in discrete particulate clouds

Thermal phenomena and size effects of Mg powder in combustion process

Combustion of Mechanically Alloyed Al∙Mg Powders in Products of a Hydrocarbon Flame

Flame Structure Analysis of Turbulent Premixed/stratified Flames with H2 Addition Considering Differential Diffusion and Stretch Effects

Study on the characteristics parameters of magnesium dust explosion suppression by various inert gases

Numerical investigation of flame behavior and quenching distance in randomly distributed poly-dispersed iron dust cloud combustion within a narrow channel

Exploring the Combustion Mechanism of Single Micron-Sized Aluminum Particles with a Numerical Model

Temperature measurement on condensed combustion products of magnesium with oxygen and water vapor

Experimental research of particle size and size dispersity on the explosibility characteristics of coal dust

Effect of equilibrium relative humidity on explosion characteristics parameters of humid magnesium dust

Analytical assessment of hetero-/homogeneous combustion of magnesium particle: Fully explicit formulas for flame characteristics

Experimental and Theoretical Analysis of Acceleration of A Gas Flame Propagating over A Dust Deposit

Study on the effects of confined space opening pressure and ignition energy on the explosion flame of AlSi10Mg dust

Investigation into the Mechanism of Ignition of Magnesium Alloy Plates by High-Temperature Molten Droplet

Numerical study on flame propagation of nano- and micron-sized aluminum dust combustion in air

Effect of Mass Ratio on Flame Propagation Behaviors and Thermal Radiation Performance of Al–AlH3 Composite Dust