Abstract:Biochar capability in CO 2 adsorption has already been confirmed by multiple research works. However, CO 2 is never emitted as a pure gas; therefore, studying the impact of other components in the gas mixture on CO 2 adsorption on biochar is necessary. One of the components that is always co-released with CO 2 is CO. In this work, the affinity of biochar, produced from softwood via fast pyrolysis at 500 °C, for CO and CO 2 was first predicted using molecular modeling binding energy calculations. The results suggested that CO 2 would be favored over CO for adsorption on biochar because of its stronger adsorption (higher released adsorption energy). The biochar adsorption of pure CO and CO 2 were then studied using batch and dynamic experiments, where the isotherm and kinetic models of the pure gas adsorptions were derived. Dual-site Langmuir isotherm fitted both of the gases equilibrium adsorption data the best, confirming the non-homogeneous surface of biochar. The Avrami kinetic model was the best-fitted model for the adsorption rate of the gases, which showed that both chemical and physical interactions were involved in the adsorption processes. The results from molecular modeling matched the results from pure CO and CO 2 adsorption on biochar, as the capacity of pure CO 2 was more than three times greater than that of pure CO. The dynamic binary CO/CO 2 adsorption experiments with 10-90 vol.% CO 2 (balanced with CO), carried out at 20 °C, showed that although both of the gases were adsorbed on biochar when the adsorption bed was fresh, some of the CO molecules were later removed by the more favored CO 2 molecules to the extent that for up to 50 vol.% CO, all of the CO molecules were removed by the CO 2 molecules, and the CO overall capacity was 0 mmol/g. For examining the impact of temperature on CO 2 and CO adsorption on biochar, the pure CO and CO 2 along with three selected binary CO/CO 2 adsorption tests were repeated at 100 °C. The pure adsorption tests of the two gases on biochar at 100 °C suggested that although CO 2 adsorption capacity was negatively impacted by the temperature increase, CO adsorption capacity was not altered by the temperature. Results from binary adsorption tests at 100 °C confirmed that at 100 °C, more CO would adsorb on biochar at the same input levels of the two gases compared to 20 °C due to CO 2 decreased adsorption at higher temperatures.

Oxidative pyrolysis for enhanced-CO 2 adsorption capacity in biosolid-derived biochar

Adsorptive Oxidation of Aqueous Sulfide Onto Zerovalent Cobalt and Magnetite-Supported Biochars: Insights into Synthesis and Mechanistic Performance

Oxidative pyrolysis of biosolid: Air concentration effects on biochar formation and kinetics

Comprehensive Analysis of Biochar-Based Co2 Capture

Impact evaluation of coexisting gas CO on CO 2 adsorption on biochar derived from softwood shavings

Pyrolysis Kinetics of Sewage Sludge and Its Biochar Characteristics

Physicochemical and adsorption properties of biochar from biomass-based pyrolytic polygeneration: effects of biomass species and temperature

Insights into CO2 adsorption on KOH-activated biochars derived from the mixed sewage sludge and pine sawdust

Eco-friendly, Stable, and High-Performance Biochar Prepared by a Twice-Modification Scheme: Saccharification of Raw Materials & Thermal Air Oxidation of Biochar

Renewable biochar derived from mixed sewage sludge and pine sawdust for carbon dioxide capture

Influence of pyrolysis parameters on phosphorus fractions of biosolids derived biochar

Advantages of dual CO 2 & O 2 adsorption model for assessment of micropore development in biochar during two-stage gasification

Relationship of CO 2 adsorption performance and physicochemical property of biochar prepared by different types of biomass waste

Optimization of Vertical Fixed-Bed Pyrolysis for Enhanced Biochar Production from Diverse Agricultural Residues

CO2 capture by adsorption on biomass-derived activated char: A review

Influence of O 2 on structural evolution of biochar in oxidative pyrolysis of cellulose

Co-pyrolysis biochar derived from sewage sludge and lignin: Synergetic effect and adsorption properties

Role of porous structure and active O-containing groups of activated biochar catalyst during biomass catalytic pyrolysis

Comparing Physicochemical Properties and Sorption Behaviors of Pyrolysis-Derived and Microwave-Mediated Biochar

Oxidative magnetization of biochar at relatively low pyrolysis temperature for efficient removal of different types of pollutants

Insight into the KOH/KMnO4 activation mechanism of oxygen-enriched hierarchical porous biochar derived from biomass waste by in-situ pyrolysis for methylene blue enhanced adsorption