Abstract:Biochars are solid products from the pyrolysis of crop residues, and their physicochemical properties vary with the pyrolysis conditions and crop residue types. It is of great significance to optimize the pyrolysis process and to regulate the physicochemical properties for high-value utilization of biochars. In this study, rice straw, wheat straw, corn stover, rape stalk and cotton stalk were taken as raw materials. And the orthogonal experiment was designed for considering the carbonization temperature, holding time and heating rate. Then the comprehensive scoring method was used to optimize the pyrolysis process. At last, the physicochemical properties of biochar under optimal technological conditions were analyzed. The results showed that the main order of the quality factors affecting physiochemical properties was carbonization temperature, holding time and heating rate. The optimum combination of the five kinds of straw carbonization process parameters was that the carbonization temperature was 500℃, the holding time was 30 min, and the heating rate was 10℃·min-1. The yields of biochars under the optimal conditions were 37.38% for rice straw, 34.42% for wheat straw, 34.39% for corn stover, 32.74% for rape stalk and 37.87% for cotton stalk, respectively. Thermal analysis showed that most of cellulose, hemicellulose and lignin in the straws were decomposed when the carbonization temperature exceeding 500℃ and the biochars showed the higher stability under optimal conditions. Due to the difference of straw compositions, the residue content of five kinds of straw had the significant differences. Under the optimal conditions, the mass fraction of fixed carbon was more than 40% and the C element was greater than 53%. The mass fractions of the N and K were 0.7% - 2.5% and 3.41% - 6.81%, respectively. The H/C and O/C ratios of the biochars were lower than those of crop residues. The ratio of H/C was lower than 0.6 in the corn stover, rape stalk and cotton stalk biochar. Therefore the biochars can be used as soil additives or carbon sequestration materials. The mass fraction of P, K, Na, Ca and Mg of the biochars were more than those of original feedstocks. Especially, the mass fraction of K was from 3.41% to 6.81%. Therefore, the biochars could be used to improve soil nutrient levels and promote plant growth, particularly in potassium-deficient soil. Furthermore, oxygenic functional groups such as -COOH and -OH are found on the surface of biochars obtained under the optimal conditions by Fourier transform infrared spectra analysis, and the species of groups were similar. The BET surface area of rice straw biochar obtained under optimal conditions was 10.35 m2/g. The N2 adsorption and desorption isotherms of the rice biochar belong to the type Ⅳ of isotherms. The average diameter of pores in rice straw biochar was calculated by the Barrett-Joyner- Halenda model. It showed that some meso-pores and macro-pores with diameters were greater than 3 nm. The biochar surface had oxygen-containing functional groups and mesoporous structures, which had the potential of fertilizer utilization. The results could provide some theoretical basis for the efficient utilization of crop residue biochars.

Optimization of Vertical Fixed-Bed Pyrolysis for Enhanced Biochar Production from Diverse Agricultural Residues

Thermal Properties of Biochars Derived from Waste Biomass Generated by Agricultural and Forestry Sectors

Process Optimization for Straws Pyrolysis and Analysis of Biochar Physiochemical Properties

Influence of Pyrolysis Temperature on Physicochemical Properties of Biochar from Rice Husk

Impact of High-Temperature Biomass Pyrolysis on Biochar Formation and Composition

Innovative bio-pyrolytic method for efficient biochar production from maize and pigeonpea stalks and their characterization

Porous Biochar Production from Microwave-Assisted Pyrolysis of Biomass

Valorization of Bio-Oil Distillation Residue Through Co-Pyrolysis with Moso Bamboo to Prepare Biochar: Optimization Study on Effects of Blend Ratio, Pyrolysis Temperature, and Residence Time

Biochar production under different pyrolysis temperatures with different types of agricultural wastes

Morphology, Pore Size Distribution, and Nutrient Characteristics in Biochars under Different Pyrolysis Temperatures and Atmospheres

Impact of Operation Factors on Biomass Pyrolysis and the Characteristics of Bio-Char

Comparison of biochars characteristics from biomass residues pro-duced through slow pyrolysis

Properties of Biochar Obtained from Tropical Crop Wastes under Different Pyrolysis Temperatures and Its Application on Acidic Soil

Effects of pyrolysis temperature on production and physicochemical characterization of biochar derived from coconut fiber biomass through slow pyrolysis process

Thermogravimetric, thermochemical, and infrared spectral characterization of feedstocks and biochar derived at different pyrolysis temperatures

Biochar as an Exceptional Bioresource for Energy, Agronomy, Carbon Sequestration, Activated Carbon and Specialty Materials

Literature analysis on properties and pyrolyzing conditions of biochars

Co-production of Biochar, Bio-oil, and Syngas from Tamarix Chinensis Biomass under Three Different Pyrolysis Temperatures

Effect of the Carbonization Temperature on the Properties of Biochar Produced from the Pyrolysis of Crop Residues

Properties of biochar derived from wood and high-nutrient biomasses with the aim of agronomic and environmental benefits

Co-pyrolysis of municipal solid waste and rice husk gasification tar to prepare biochar: An optimization study using response surface methodology