Physicochemical and adsorption properties of biochar from biomass-based pyrolytic polygeneration: effects of biomass species and temperature

Zhang Xiong,Zheng Huanhuan,Wu Jing,Chen Wei,Chen Yingquan,Xuezhi Gao,Yang Haiping,Chen Hanping
DOI: https://doi.org/10.1007/s42773-021-00102-5
IF: 12.7
2021-07-06
Biochar
Abstract:<p class="a-plus-plus">Biochar obtained from a biomass pyrolytic polygeneration technology exhibits great potential as an adsorbent, because of its renewability, porosity and desirable surface chemical properties. Pyrolysis temperature and feed are important elements in the preparation of biochar. Thus, the effects of these factors on the physicochemical properties of biochar were investigated in this study. The adsorption of biochar was evaluated using water, CO<sub class="a-plus-plus">2</sub>, phenol, and methylene blue (MB) as adsorbates. The correlation between adsorption capacity and physicochemical properties was determined using the Pearson correlation. Results indicated that temperature could significantly affect the structure of biochar. The effects of biomass species were also noticeable as well. The number of macropores and their contribution to the total surface area for cotton stalk, bamboo, and rapeseed stalk increased with an increase in temperatures, meanwhile, the number of micropores decreased at high temperatures. At the same temperature, the macropore, mesopore, and micropore components of biochar produced by different species were markedly different. The water adsorption and CO<sub class="a-plus-plus">2</sub> adsorption of biochar were close to those of commercial activated carbon (AC), whereas the adsorption capacity of untreated biochar on phenol and MB was less than that of AC. Porosity exerted more significant effects on the adsorption capacity of biochar, compared with functional groups. The surface area of the micropores exhibited a significant positive correlation with the adsorption of CO<sub class="a-plus-plus">2</sub>, phenol, and MB. The hydroxyl group was positively correlated with water adsorption.</p>
environmental sciences,soil science
What problem does this paper attempt to address?
### Problems the Paper Attempts to Solve This paper aims to explore the physicochemical properties and adsorption performance of biochar prepared by biomass-based pyrolytic polygeneration technology, and to analyze the effects of different biomass types and temperatures on the structure and adsorption capacity of biochar. Specifically, the study focuses on the following aspects: 1. **Effects of Biomass Types and Temperature on the Physicochemical Properties of Biochar**: - The study investigated the pore structure and surface chemical properties of biochar prepared from four different biomass feedstocks (cotton stalk, bamboo, rapeseed stalk, and rice husk) at different temperatures (250°C to 950°C). - It analyzed how these factors affect the physical properties of biochar, such as specific surface area, total pore volume, micropore area, and volume. 2. **Adsorption Performance of Biochar**: - The adsorption capacity of biochar for water, carbon dioxide (CO2), phenols, and methylene blue (MB) was evaluated. - Pearson correlation analysis was used to determine the relationship between adsorption capacity and physicochemical properties. 3. **Correlation Between Structure and Adsorption Performance**: - The study explored how the pore structure and surface chemical properties of biochar affect its adsorption performance. - Special attention was given to the significant positive correlation between micropore area and the adsorption capacity for CO2, phenols, and methylene blue, as well as the positive correlation between hydroxyl groups and water adsorption. ### Main Findings - **Effect of Temperature on Biochar Structure**: - Temperature significantly affects the structure of biochar, especially the formation of micropores. As the temperature increases, the number of micropores first increases and then decreases, while the number of macropores and mesopores gradually increases. - Above 450°C, micropores contribute more than 90% of the total surface area, indicating that high-temperature treatment helps generate high-surface-area microporous biochar. - **Effect of Biomass Types**: - Different biomass feedstocks have a significant impact on the pore structure and adsorption performance of biochar. For example, bamboo and rapeseed stalk biochar exhibit the highest micropore surface area and mesopore number at 850°C, while the pore characteristics of cotton stalk and rice husk biochar are relatively poor. - **Adsorption Performance**: - The adsorption capacity of biochar for water and CO2 is close to that of commercial activated carbon (AC), but its adsorption capacity for phenols and methylene blue is lower. - There is a significant positive correlation between micropore surface area and the adsorption capacity for CO2, phenols, and methylene blue, while the influence of functional groups on adsorption capacity is relatively small. ### Conclusion This study provides a theoretical basis for the preparation of biochar with specific adsorption properties, particularly in selecting suitable biomass feedstocks and optimizing pyrolysis temperature. By regulating the pore structure and surface chemical properties of biochar, its potential application as a low-cost adsorbent can be enhanced.