Abstract:Lead-zinc mine tailing waste can have significant environmental impacts due to its potential for releasing toxic elements into the surroundings and contaminating local soil and water. This paper focuses on the valorization of lead-zinc mine tailing waste through geopolymerization, a sustainable process that can transform waste into useful building materials. Geopolymer matrixes with various mixtures of mine tailing (0-100 wt%), fly ash (0-100 wt%), and flue gas desulfurization (FGD) gypsum (0, 5, and 10 wt%) were synthesized using different activators such as sodium hydroxide (NaOH, 5, 10 M) and sodium silicate (waterglass, 0, 12.5 wt%). Visual inspection, unconfined compressive strength (UCS) testing, and microstructural analysis (e.g., X-ray diffractions, Fourier transforms infrared, and scanning electron microscopy) were employed for the physicochemical characterization of these geopolymers. The highest UCS value of 24.1 MPa was observed in a geopolymer specimen with 100 wt% fly ash and activated by 10 M NaOH and cured for 28 days. The blending of mine tailings would result in strength recession, e.g., the integrating of 25 wt% tailings showed a UCS of 12.3 MPa. The addition of 5 wt% gypsums can improve early strength development, particularly for matrixes with 50-75 wt% fly ash. But adding 10 wt% gypsums would lead to strength retrogression of the resulting geopolymers. The introduction of waterglass can also facilitate geopolymerization and improve strength development. However, the cointegrating of gypsum and waterglass can induce an antagonistic effect and lead to the collapse of the geopolymer specimens. The findings revealed that the strength and microstructural properties of geopolymer are determined by the matrix compositions, alkaline activators, etc. Effective regulation of these factors can produce geopolymer matrixes with high dimensional stability and UCS that well meet construction material standards. Overall, the study indicates that geopolymerization represents a viable and eco-friendly solution for valorizing lead-zinc mine tailing waste and gaining alternative building materials.

Optimizing raw material composition and alkali content in low silicon-aluminum tailings-based geopolymers

Synthesis of one-part geopolymers from alkaline-activated molybdenum tailings: Mechanical properties and microstructural evolution

Exploring the chemistry of metakaolin-based geopolymers

Valorization of lead-zinc mine tailing waste through geopolymerization: Synthesis, mechanical, and microstructural properties

Synthesis of tailing slurry-based geopolymers for the highly efficient immobilization of heavy metals: Behavior and mechanism

Impacts of Alkaline Washing Pretreatment on Municipal Solid Waste Incineration Fly Ash (MSWI FA) and Resulting Geopolymers

Alkali-hydrothermal activation of mine tailings to prepare one-part geopolymer: Activation mechanism, workability, strength, and hydration reaction

Utilization of aluminum sludge (AS) to enhance mine tailings-based geopolymer

Effects of Spodumene Flotation Tailings on Mechanical Properties of Acid-Based Geopolymer Mortar

Alkali-hydrothermal activation of tailings with red mud as a supplementary alkali source to synthesize one-part geopolymer

Study on basic performance and drying shrinkage of binary solid waste geopolymer prepared with recycled powders and slag

Geopolymerization kinetics of steel slag activated gasification coal fly ash: A case study for amorphous-rich slags

Reaction kinetics, mechanical properties, and microstructure of nano-modified recycled concrete fine powder/slag based geopolymers

Effect of CaO/Na2SiO3 ratio on mechanical properties, microstructures and environmental leaching characteristics of neutralization slag based geopolymers

Designing low-carbon fly ash based geopolymer with red mud and blast furnace slag wastes: Performance, microstructure and mechanism

Solidification of (Pb–Zn) mine tailings by fly ash-based geopolymer I: influence of alkali reagents ratio and curing condition on compressive strength

Modeling and optimization of fly ash–slag-based geopolymer using response surface method and its application in soft soil stabilization

The Effect of Various Si/Al, Na/Al Molar Ratios and Free Water on Micromorphology and Macro-Strength of Metakaolin-Based Geopolymer

Optimizing the preparation of steel slag-metakaolin based geopolymers by response surface methodology and in-depth investigation of Pb immobilization mechanism

The Synergistic Mechanism and Stability Evaluation of Phosphogypsum and Recycled Fine Powder-Based Multi-Source Solid Waste Geopolymer

Stabilization/solidification mechanisms of tin tailings and fuming slag-based geopolymers for different heavy metals