Abstract:Solidification/stabilization (S/S) is a low-cost and efficient method for enhancing the mechanical properties of gold ore tailings powder (GTP) and decontaminating tailings. However, the traditional cement-based stabilization method is associated with environmental pollution and questionable sustainability. In this study, industrial waste residue was mixed with alkaline activators to prepare a sustainable waste-based composite geopolymer (WCG) to stabilize the GTP. Considering the cost of the novel geopolymer and the economic constraints of mining enterprises, a ratio of 5% geopolymer and 95% GTP was selected. The hydration mechanism, microstructure, mechanical properties, and leaching characteristics were analyzed after curing periods of 3, 7, 14, 28, and 90 days (d). The tests included phase structure analysis via x-ray diffraction analysis, thermogravimetric analysis and unconfined compression strength tests to evaluate the hydration products and strength of the stabilized GTP. The results showed that the increase in amorphous/unidentified content was not obvious after 28 d of curing and that the stabilized tailings with the same content of WCG had higher mechanical strength than those stabilized with ordinary Portland cement (32.5 MPa). Scanning electron microscope-energy dispersive spectroscopy and nitrogen adsorption tests were used to characterize the microstructure of the stabilized materials. These results indicate that the formation of C-(A)-S-H gels contributed to improvement in the degree of compaction of the stabilized samples. The immobilization mechanism of arsenic included precipitation, physical encapsulation, adsorption, and ion substitution. The stabilized materials had a dual-pore fabric characterized by interaggregate and intra-aggregate pores. The properties of the leaching solution, including the pH, electrical conductivity, oxidation-reduction potential, and heavy metal ion leaching concentrations, were determined to evaluate the leaching performance of the stabilized GTP. The relationship between the chemical properties of the leaching solution and the concentration of the leaching ions was analyzed to explain the immobilization mechanism of harmful elements. All harmful elements were well immobilized after 7 d of curing, and the leaching concentration remained constant over a longer curing time. This study provides a reference for the sustainable management of GTP and for improving the stabilization of tailings dams.

Synthesis of tailing slurry-based geopolymers for the highly efficient immobilization of heavy metals: Behavior and mechanism

Long-term leaching characteristics of heavy metals from bauxite tailing slurry-based geopolymer backfill: experimental and numerical simulation studies

Stabilization/solidification mechanisms of tin tailings and fuming slag-based geopolymers for different heavy metals

Geopolymer synthesized from electrolytic manganese residue and lead-zinc smelting slag: Compressive strength and heavy metal immobilization

Micro-assessment of heavy metal immobilization within alkali-activated copper tailings-slag geopolymer

Valorization of lead-zinc mine tailing waste through geopolymerization: Synthesis, mechanical, and microstructural properties

Optimizing raw material composition and alkali content in low silicon-aluminum tailings-based geopolymers

Optimization of Geopolymers for Sustainable Management of Mine Tailings: Impact on Mechanical, Microstructural, and Toxicological Properties

Solidification/stabilization of gold ore tailings powder using sustainable waste-based composite geopolymer

Synthesis of Geopolymers Using Municipal Solid Waste Incineration Fly Ash and Construction and Demolition Waste: Mechanical and Thermal Activation

Optimizing the preparation of steel slag-metakaolin based geopolymers by response surface methodology and in-depth investigation of Pb immobilization mechanism

Barrier effect of coal bottom ash-based geopolymers on soil contaminated by heavy metals

Low-carbon treatment of zinc contaminated iron tailings using high-calcium geopolymer: Influence of wet-dry cycle coupled with acid attack

Codisposal of landfill leachate concentrate and antimony mine soils using a one-part geopolymer system for cationic and anionic heavy metals immobilization

Preparation and Immobilization Mechanism of Red Mud/Steel Slag-Based Geopolymers for Solidifying/Stabilizing Pb-Contaminated Soil

Heavy metals immobilization of ternary geopolymer based on nickel slag, lithium slag and metakaolin

Preparation and characterization of industrial solid waste based geopolymer for immobilizing Pb and Cd in the sediment

Solidification/Stabilization of Pb2+ and Cd2+ Contaminated Soil Using Fly Ash and GGBS Based Geopolymer

Synthesis of geopolymer using municipal solid waste incineration fly ash and steel slag: Hydration properties and immobilization of heavy metals

Quantifying gel properties of industrial waste-based geopolymers and their application in Pb2+ and Cu2+ removal

Remediation of Pb–Cd contaminated soil using coal bottom ash-based geopolymer and coir: Soil remodeling and mechanism