Abstract:In this paper, two aspects of studies are carried out: (1) synthesis of geopolymer by using slag and metakaolin; (2) immobilization behaviors of slag based geopolymer in a presence of Pb and Cu ions. As for the synthesis of slag based geopolymer, four different slag content (10%, 30%, 50%, 70%) and three types of curing regimes (standard curing, steam curing and autoclave curing) are investigated to obtain the optimum synthesis condition based on the compressive and flexural strength. The testing results showed that geopolymer mortar containing 50% slag that is synthesized at steam curing (80°C for 8h), exhibits higher mechanical strengths. The compressive and flexural strengths of slag based geopolymer mortar are 75.2MPa and 10.1MPa, respectively. Additionally, Infrared (IR), X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques are used to characterize the microstructure of the slag based geopolymer paste. IR spectra show that the absorptive band at 1086cm−1 shifts to lower wave number around 1007cm−1, and some six-coordinated Als transforms into four-coordination during the synthesis of slag based geopolymer paste. The resulting slag based geopolymeric products are X-ray amorphous materials. SEM observation shows that it is possible to have geopolymeric gel and calcium silicate hydrate (C–S–H) gel forming simultaneously within slag based geopolymer paste. As for immobilization of heavy metals, the leaching tests are employed to investigate the immobilization behaviors of the slag based geopolymer mortar synthesized under the above optimum condition. The leaching tests show that slag based geopolymer mortar can effectively immobilize Cu and Pb heavy metal ions, and the immobilization efficiency reach 98.5% greater when heavy metals are incorporated in the slag geopolymeric matrix in the range of 0.1–0.3%. The Pb exhibits better immobilization efficiency than the Cu in the case of large dosages of heavy metals.

Geopolymer synthesized from electrolytic manganese residue and lead-zinc smelting slag: Compressive strength and heavy metal immobilization

Heavy metals immobilization of ternary geopolymer based on nickel slag, lithium slag and metakaolin

Synthesis and heavy metal immobilization behaviors of slag based geopolymer.

Stabilization/solidification mechanisms of tin tailings and fuming slag-based geopolymers for different heavy metals

Synthesis of Electrolytic Manganese Slag–Solid Waste-Based Geopolymers: Compressive Strength and Mn Immobilization

Lead zinc slag-based geopolymer: Demonstration of heavy metal solidification mechanism from the new perspectives of electronegativity and ion potential

Waste Solidification/stabilization of Lead-Zinc Slag by Utilizing Fly Ash Based Geopolymers

Strength Evaluation by Using Polycarboxylate Superplasticizer and Solidification Efficiency of Cr 6+ , Pb 2+ and Cd 2+ in Composite Based Geopolymer

Solidification/stabilization of lead-zinc smelting slag in composite based geopolymer

Preparation and Immobilization Mechanism of Red Mud/Steel Slag-Based Geopolymers for Solidifying/Stabilizing Pb-Contaminated Soil

Optimizing the preparation of steel slag-metakaolin based geopolymers by response surface methodology and in-depth investigation of Pb immobilization mechanism

Co-disposal of MSWI Fly Ash and Electrolytic Manganese Residue Based on Geopolymeric System.

Synthesis of tailing slurry-based geopolymers for the highly efficient immobilization of heavy metals: Behavior and mechanism

Optimization for the Preparation of Composite Geopolymer Using Response Surface Methodology and Its Application in Lead-Zinc Tailings Solidification

Performance and Heavy Metal Leaching of Porous Geopolymer Based on Solid Wastes

Enhanced geopolymeric co-disposal efficiency of heavy metals from MSWI fly ash and electrolytic manganese residue using complex alkaline and calcining pre-treatment.

Preparation and characterization of industrial solid waste based geopolymer for immobilizing Pb and Cd in the sediment

Codisposal of landfill leachate concentrate and antimony mine soils using a one-part geopolymer system for cationic and anionic heavy metals immobilization

Synthesis of Geopolymers Using Municipal Solid Waste Incineration Fly Ash and Construction and Demolition Waste: Mechanical and Thermal Activation

Immobilization of Cu 2+ , Zn 2+ , Pb 2+ , and Cd 2+ During Geopolymerization

Synthesis of geopolymer using municipal solid waste incineration fly ash and steel slag: Hydration properties and immobilization of heavy metals