Abstract:This study assessed the impact of calcium silicate slag (CSS), an industrial by-product of aluminum extraction from fly ash, on the reaction kinetics, compressive strength, and efflorescence of one-part sodium carbonate-activated slag (SCS). Various proportions of CSS (0%, 10%, and 20%) were used to substitute for slag. The resulting performances were evaluated through chemical shrinkage, heat liberation, compressive strength, water absorption, phase composition (XRD and TG.), microstructures (BET and BSE-EDS), and simulated efflorescence test (partially and fully immersed in deionized water). The results indicate that the CSS possesses a porous structure. The addition of CSS impairs flowability but accelerates the development of chemical shrinkage and heat liberation. The incorporation of CSS promotes the transformation of gaylussite, leading to an increase in CASH and hydrotalcite formation. Consequently, a higher compressive strength and a lower water adsorption rate are achieved. 10% CSS addition improves the splitting tensile strength of SCS under conditions of partial immersion in the efflorescence test. However, a 20% CSS substitution exacerbates the formation of efflorescence products and reduces the splitting tensile strength. These observations are associated with residual alkalis in CSS, a lower Al/Si ratio of products, and an increase in capillary pores attributed to CSS particles. This paper demonstrates the feasibility of using alkaline solid waste for slag substitution and performance regulation in SCS and reveals the underlying mechanism. The prepared CSS-SCS binder exhibits much lower energy consumption and CO2 emission than traditional cement-based material, as determined by life cycle assessment.

Geopolymerization kinetics of steel slag activated gasification coal fly ash: A case study for amorphous-rich slags

Synthesis and Properties of Fly Ash Geopolymer with Dyeing Sludge

Understanding the Role of Calcium Silicate Slag in Sodium Carbonate-Activated Green Materials: Influence on Kinetics, Strength, and Efflorescence

The Performance and Reaction Mechanism of Untreated Steel Slag Used as a Microexpanding Agent in Fly Ash-Based Geopolymers

Effects of ladle slag on Class F fly ash geopolymer: Reaction mechanism and high temperature behavior

Incorporating steel slag in the production of high heat resistant FA based geopolymer paste via pressure molding

Effects of Steel Slag on Mechanical Properties and Mechanism of Fly Ash–Based Geopolymer

The mechanism of pristine steel slag for boosted performance of fly ash-based geopolymers

Impacts of Alkaline Washing Pretreatment on Municipal Solid Waste Incineration Fly Ash (MSWI FA) and Resulting Geopolymers

Study on the mechanical properties and water stability of steel slag-fly ash geopolymer for base Stabilisation

Recycling of steel slag as an alkali activator for blast furnace slag: geopolymer preparation and its application in composite cement

Mechanical behavior and microstructure evolution of slag-fly ash based geopolymer stabilized sand

Mechanical activation of coal gasification slag for one-part geopolymer synthesis by alkali fusion and component additive method

Effect of desulphurization gypsum on hardening mechanism of the geopolymer produced with steel slag and granulated blast furnace slag

Strength and microstructural analysis of geopolymer prepared with coal-based synthetic natural gas slag

Synthesis of Geopolymers Using Municipal Solid Waste Incineration Fly Ash and Construction and Demolition Waste: Mechanical and Thermal Activation

Research on Resource Utilization of Dyeing Sludge with High Calcium Fly Ash

Synthesis of geopolymer using municipal solid waste incineration fly ash and steel slag: Hydration properties and immobilization of heavy metals

Designing low-carbon fly ash based geopolymer with red mud and blast furnace slag wastes: Performance, microstructure and mechanism

Mechanical properties and solidification mechanism of coal gangue-granulated blast furnace slag geopolymer stabilized engineering slurry

Cleaner geopolymer prepared by co-activation of gasification coal fly ash and steel slag: durability properties and economic assessment