Abstract:Over the past three decades, significant advancements in lithium-ion battery technology have greatly improved human convenience, particularly in today's thriving electric vehicle industry. Further enhancements in the energy density, cycle life, and safety of lithium-ion batteries are crucial for the widespread adoption of electric vehicles. In recent years, transition metal layered oxides have garnered significant attention in the industrial power battery sector due to their advantages, including high specific capacity, commendable low-temperature performance, and cost-effectiveness. Increasing the nickel content and adjusting the charging cut-off voltage are recognized as effective means to enhance the energy density of transition metal layered oxides. However, these strategies tend to degrade cycling stability and thermal safety in conventional polycrystalline layered cathode materials. Benefiting from the mechanical stability of intact primary particles, the single-crystal structure of layered cathode materials can effectively mitigate intergranular cracking issues associated with high charging voltages. Nevertheless, due to the intrinsic structural properties of layered materials, singlecrystal structures still face challenges related to sluggish Li+ transport kinetics, heterogeneous state of charge, anisotropic changes in lattice parameters, cation mixing, and chemo-mechanical degradation. The temporal and spatial evolution of the physicochemical properties within the internal microstructure of materials still requires comprehensive analysis using advanced operando characterization techniques. Currently, there is limited understanding of the intricate interplay between thermodynamics and kinetics in the synthesis process of single-crystal cathode materials. A more profound exploration of the structural degradation and synthesis mechanisms of single-crystal materials will serve as a fundamental basis for targeted modification strategies. Regrettably, existing single-crystal synthesis processes and modification approaches still fall short of market expectations. This shortfall is especially noticeable in future applications in solid-state batteries, where interface issues related to solid-state-electrolyte and cathode material are serious. Addressing these challenges necessitates the precise regulation of the microstructure of composite cathodes. Therefore, this review systematically analyzes and summarizes common issues related to the failure of both polycrystal and single-crystal structures, taking into account the intrinsic structural evolution at various temporal and spatial scales. We also outline strategies for regulating the synthesis process, element doping, and surface-interface modification of single-crystal nickel-rich layered cathode materials from the perspective of coherent structural design. We also intent to elucidate the essential connection between structural design and electrochemical performance. The microstructural design of single-crystal nickel-rich cathode materials should emphasize the alignment of lattice parameters between heterostructures and layered oxides, as well as the modulation of their spatial distribution, thereby ensuring the long-term efficacy of element doping and surface-interface modification. Finally, we offer a perspective on the future development of single-crystal nickel-rich cathode materials, highlighting their potential success in the realm of power batteries.

Unrecoverable lattice rotation governs structural degradation of single-crystalline cathodes

Unravelling the Impact of Reaction Paths on Mechanical Degradation of Intercalation Cathodes for Lithium-Ion Batteries.

Unraveling the Nanoscopic Strain Evolution in Single Crystal Cathodes

Thermal-healing of lattice defects for high-energy single-crystalline battery cathodes

Native lattice strain induced structural earthquake in sodium layered oxide cathodes

Origin of structural degradation in Li-rich layered oxide cathode

Lattice‐Cell Orientation Disorder in Complex Spinel Oxides

Surface Regulation Enables High Stability Of Single-Crystal Lithium-Ion Cathodes At High Voltage

Atomic-Resolution In Situ Exploration of the Phase Transition Triggered Failure in a Single-Crystalline Ni-Rich Cathode

Structural Regulation Enables High Interfacial Functionality for Ni-Rich Single-Crystalline Cathodes

Kinetic Origin of Planar Gliding in Single-Crystalline Ni-Rich Cathodes

Data-driven unlocking volume conservation in single-crystal Ni-rich layered oxides

Understanding the Degradation Mechanisms of Lithium Ion Batteries Using in-Situ Multi-Scale Diffraction Techniques

Single-Crystal Nickel-Rich Cathode Materials: Challenges and Strategies

Unveiling Surface Reconstruction as the Primary Trigger for Capacity Loss in Ultra‐High Nickel Cathodes

Structure heterogeneity in polycrystalline and single-crystal high-nickel cathode materials by synchrotron radiation XAS

Determining the Fundamental Failure Modes in Ni-rich Lithium Ion Battery Cathodes

In Operando Visualization of Cation Disorder Unravels Voltage Decay in Ni‐Rich Cathodes

Heterogeneous Degradation in Thick Nickel‐Rich Cathodes During High‐Temperature Storage and Mitigation of Thermal Instability by Regulating Cationic Disordering

High‐Voltage Charging‐Induced Strain, Heterogeneity, and Micro‐Cracks in Secondary Particles of a Nickel‐Rich Layered Cathode Material

Electrochemomechanical failure in layered oxide cathodes caused by rotational stacking faults