Abstract:As one of the commonly-used solid dosage forms, pharmaceutical tablets have been widely used to deliver active drugs into the human body, satisfying patient’s therapeutic requirements. To manufacture tablets of good quality, diluent powders are generally used in formulation development to increase the bulk of formulations and to bind other inactive ingredients with the active pharmaceutical ingredients (APIs). For formulations of a low API dose, the drug products generally consist of a large fraction of diluent powders. Hence, the attributes of diluents become extremely important and can significantly influence the final product property. Therefore, it is essential to accurately characterise the mechanical properties of the diluents and to thoroughly understand how their mechanical properties affect the manufacturing performance and properties of the final products, which will build a sound scientific basis for formulation design and product development. In this study, a comprehensive evaluation of the mechanical properties of the widely-used pharmaceutical diluent powders, including microcrystalline cellulose (MCC) powders with different grades (i.e., Avicel PH 101, Avicel PH 102, and DG), mannitol SD 100, lactose monohydrate, and dibasic calcium phosphate, were performed. The powder compressibility was assessed with Heckel and Kawakita analyses. The material elastic recovery during decompression and in storage was investigated through monitoring the change in the dimensions of the compressed tablets over time. The powder hygroscopicity was also evaluated to examine the water absorption ability of powders from the surroundings. It was shown that the MCC tablets exhibited continuous volume expansion after ejection, which is believed to be induced by (1) water absorption from the surrounding, and (2) elastic recovery. However, mannitol tablets showed volume expansion immediately after ejection, followed by the material shrinkage in storage. It is anticipated that the expansion was induced by elastic recovery to a limited extent, while the shrinkage was primarily due to the solidification during storage. It was also found that, for all powders considered, the powder compressibility and the elastic recovery depended significantly on the particle breakage tendency: a decrease in the particle breakage tendency led to a slight decrease in the powder compressibility and a significant drop in immediate elastic recovery. This implies that the particle breakage tendency is a critical material attribute in controlling the compression behaviour of pharmaceutical powders.

Correlation between the powder characteristics and particle morphology of microcrystalline cellulose (MCC) and its tablet application performance

Evaluating the Effect of Microcrystalline Cellulose Variations on Tablet Quality of Natural Plant Product Using a Design of Experiment Approach

On Identification of Critical Material Attributes for Compression Behaviour of Pharmaceutical Diluent Powders

Studies on the Influence of High-Shear Granulation Process on the Compressibility of Microcrystalline Cellulose

Electrostatic powder coated osmotic pump tablets: Influence factors of coating powder adhesion and film formation

Preparation and Characterization of Surface-Engineered Coarse Microcrystalline Cellulose Through Dry Coating with Silica Nanoparticles

Preparation of Sustained Release Capsules by Electrostatic Dry Powder Coating, Using Traditional Dip Coating As Reference

The Effect of Microcrystalline Cellulose–CaHPO4 Mixtures in Different Volume Ratios on the Compaction and Structural–Mechanical Properties of Tablets

Dependence of Tablet Brittleness on Tensile Strength and Porosity.

Flowability, Binding and Release Property of “Self-Lubricating” Microcrystalline Cellulose

The effect of granules characters on mechanical properties of press-coated tablets: A comparative study

Microstructure of Tablet—Pharmaceutical Significance, Assessment, and Engineering

DEM-DDM Investigation of the Tablet Coating Process Using Different Particle Shape Models

Influence of the porosity of cushioning excipients on the compaction of coated multi-particulates

Application of Multidimensional Scaling to Preformulation Sciences: A Discriminatory Tool to Group Microcrystalline Celluloses

Physico-chemical Characterization and Comparison of Microcrystalline Cellulose from Several Lignocellulosic Sources

How can the heterogeneous distribution of a component in low concentration in the mixture at the radial surface of a tablet modify the mechanical properties of a tablet?

Comparision of Domestic MCC and Avicel As Tablet Excipient

Effect of particle size on the dispersion behavior of magnesium stearate blended with microcrystalline cellulose

Effects of Size and Dispersity of Microcrystalline Celluloses on Size, Structure and Stability of Nanocrystalline Celluloses Extracted by Acid Hydrolysis

Effects of Ball Milling Processes on the Microstructure and Rheological Properties of Microcrystalline Cellulose As a Sustainable Polymer Additive