Abstract:As one of the commonly-used solid dosage forms, pharmaceutical tablets have been widely used to deliver active drugs into the human body, satisfying patient’s therapeutic requirements. To manufacture tablets of good quality, diluent powders are generally used in formulation development to increase the bulk of formulations and to bind other inactive ingredients with the active pharmaceutical ingredients (APIs). For formulations of a low API dose, the drug products generally consist of a large fraction of diluent powders. Hence, the attributes of diluents become extremely important and can significantly influence the final product property. Therefore, it is essential to accurately characterise the mechanical properties of the diluents and to thoroughly understand how their mechanical properties affect the manufacturing performance and properties of the final products, which will build a sound scientific basis for formulation design and product development. In this study, a comprehensive evaluation of the mechanical properties of the widely-used pharmaceutical diluent powders, including microcrystalline cellulose (MCC) powders with different grades (i.e., Avicel PH 101, Avicel PH 102, and DG), mannitol SD 100, lactose monohydrate, and dibasic calcium phosphate, were performed. The powder compressibility was assessed with Heckel and Kawakita analyses. The material elastic recovery during decompression and in storage was investigated through monitoring the change in the dimensions of the compressed tablets over time. The powder hygroscopicity was also evaluated to examine the water absorption ability of powders from the surroundings. It was shown that the MCC tablets exhibited continuous volume expansion after ejection, which is believed to be induced by (1) water absorption from the surrounding, and (2) elastic recovery. However, mannitol tablets showed volume expansion immediately after ejection, followed by the material shrinkage in storage. It is anticipated that the expansion was induced by elastic recovery to a limited extent, while the shrinkage was primarily due to the solidification during storage. It was also found that, for all powders considered, the powder compressibility and the elastic recovery depended significantly on the particle breakage tendency: a decrease in the particle breakage tendency led to a slight decrease in the powder compressibility and a significant drop in immediate elastic recovery. This implies that the particle breakage tendency is a critical material attribute in controlling the compression behaviour of pharmaceutical powders.

The Comparison between Pilot-Grade Spray Dryer and Laboratory-Grade Spray Dryer: Structure, Powder Properties and Application for Direct Compaction

Electrostatic powder coated osmotic pump tablets: Influence factors of coating powder adhesion and film formation

The preparation, characterization, and application of porous core–shell composite particles produced with laboratory-scale spray dryer

Effects of different mesh nebulizer sources on the dispersion of powder formulations produced with a new small-particle spray dryer

Impact of excipient choice on the aerodynamic performance of inhalable spray-freeze-dried powders

DEM-DDM Investigation of the Tablet Coating Process Using Different Particle Shape Models

Co-Spray Drying of Paracetamol and Propyphenazone with Polymeric Binders for Enabling Compaction and Stability Improvement in a Combination Tablet

Particle Engineering by Nano Spray Drying: Optimization of Process Parameters with Hydroethanolic versus Aqueous Solutions

Mechanistic Formulation Design of Spray-Dried Powders

On Identification of Critical Material Attributes for Compression Behaviour of Pharmaceutical Diluent Powders

Particle morphology and powder properties during spray drying of maltodextrin and whey protein mixtures

Comparative Study of Powder Carriers Physical and Structural Properties

Effect of spray drying technology on characteristics of NiFe2O4-10NiO/xM composite ceramic powder

Effect of spray drying technology on characteristics of NiFe_2O_4-10NiO/xM composite ceramic powder

Combined Control of Morphology and Polymorph in Spray Drying of Mannitol for Dry Powder Inhalation

Advancements in spray drying, part II: From configuration to variegated applications in pharmaceuticals and chemical processing

Are traditional small-scale screening methods reliable to predict pharmaceutical spray drying?

The effect of granules characters on mechanical properties of press-coated tablets: A comparative study

Process Investigation of A Novel Compaction Technique with Pellet-Containing Granules

Influence of Composition and Spray-Drying Process Parameters on Carrier-Free DPI Properties and Behaviors in the Lung: A review

Advantages and challenges of the spray-drying technology for the production of pure drug particles and drug-loaded polymeric carriers