Abstract:AbstractAccurate modeling of fractured reservoirs is very challenging due to the various scales of fractures. The fracture networks may be too complex to be represented using the equivalent continuum model (ECM) or dual porosity-dual permeability (DPDK) model, yet too computational costly to be modeled using the discrete fracture (DFM) or embedded discrete fracture (EDFM) models. This paper proposes a hybrid model that integrates ECM, DPDK, and an integrally embedded discrete fracture model (IEDFM) to account for multi-scale fractures. The hybrid model is applied to investigate the coupled geomechanics-fluid flow process in fractured reservoirs.In the hybrid model, small-scale fractures are upscaled into effective matrix permeability tensor using ECM, medium-scale fractures are considered as an individual continuum using DPDK, and large-scale fractures are explicitly represented using IEDFM. The multiphase flow in effective matrix and fracture continua is modeled using the multi-point flux approximation (MPFA), and fluid exchanges between the anisotropic continua and the large-scale fracture control volumes are precisely calculated using the IEDFM. Empirical models are used to calculate the displacement of natural fractures, and analytical models are used to calculate the aperture changes of hydraulic fractures. The overall deformation of a fractured rock is described using an equivalent method. The coupled geomechanics-fluid flow system is discretized by the finite element-finite volume method (FV-FEM) and solved using the fixed-stress split iterative coupling approach.Several examples are presented to demonstrate the applicability of the proposed method. The hybrid model is first employed to simulate water flooding process in a naturally fractured reservoir with multi-scale fractures. Effects of different scales of fractures, geomechanics coupling and capillary pressure are investigated. A case of producing from horizontal well in a hydraulic fractured tight oil reservoir is then studied, where the hydraulic fractures are modeled explicitly using IEDFM and the stimulation areas around hydraulic fractures are modeled using DPDK. Effects of stimulation area size on the pressure depletion and on the stress evolution process in the reservoir are investigated.

A Three-Dimensional Grouting Model Considering Hydromechanical Coupling Based on the Combined Finite-Discrete Element Method

A Coupled SPFEM/DEM Approach for Multiscale Modeling of Large‐deformation Geomechanical Problems

Parallel Hierarchical Multiscale Modelling of Hydro-Mechanical Problems for Saturated Granular Soils

A two-dimensional grouting model considering hydromechanical coupling and fracturing for fractured rock mass

Bridging The Micro And Macro For Granular Media: A Computational Multi-Scale Paradigm

Numerical Investigation of Grout Diffusion Accounting for the Dynamic Pressure Boundary Condition and Spatiotemporal Variation in Slurry Viscosity

Volume of Fluid Method Based Finite Element Analysis of Fracture Grouting

A three-dimensional thermal-hydro-mechanical coupling model for simulation of fracturing driven by multiphysics

The unified pipe-interface element method for simulating the coupled hydro-mechanical grouting process in fractured rock with fracture propagation

Two-Dimensional Meso-Scale Simulation of Hydraulic Fracture in Concrete

A FDEM-based 2D coupled thermal-hydro-mechanical model for multiphysical simulation of rock fracturing

A model of cement grout flow in a fracture network system

Modelling slurry flowing and analyzing grouting efficiency under hydro-mechanical coupling using numerical manifold method

Numerical Modeling of Grouted Connection Damage Development under Uniaxial Loading

A FDEM 3D moisture migration-fracture model for simulation of soil shrinkage and desiccation cracking

Coupled Geomechanics and Fluid Flow Modeling for Petroleum Reservoirs Accounting for Multi-Scale Fractures

A Hybrid Finite Volume and Extended Finite Element Method for Hydraulic Fracturing with Cohesive Crack Propagation in Quasi-Brittle Materials

A Multi-Field and Fluid–solid Coupling Method for Porous Media Based on DEM-PNM

An extended discontinuous deformation analysis (DDA) for simulation of grouting reinforcement in a water-rich fractured rock tunnel

A 2D Mixed Fracture–pore Seepage Model and Hydromechanical Coupling for Fractured Porous Media

A 2D continuous-discontinuous unified pore-fracture seepage model for hydro-mechanical coupling in the combined finite-discrete element method (FDEM) using node binding scheme