Abstract:AbstractAccurate modeling of fractured reservoirs is very challenging due to the various scales of fractures. The fracture networks may be too complex to be represented using the equivalent continuum model (ECM) or dual porosity-dual permeability (DPDK) model, yet too computational costly to be modeled using the discrete fracture (DFM) or embedded discrete fracture (EDFM) models. This paper proposes a hybrid model that integrates ECM, DPDK, and an integrally embedded discrete fracture model (IEDFM) to account for multi-scale fractures. The hybrid model is applied to investigate the coupled geomechanics-fluid flow process in fractured reservoirs.In the hybrid model, small-scale fractures are upscaled into effective matrix permeability tensor using ECM, medium-scale fractures are considered as an individual continuum using DPDK, and large-scale fractures are explicitly represented using IEDFM. The multiphase flow in effective matrix and fracture continua is modeled using the multi-point flux approximation (MPFA), and fluid exchanges between the anisotropic continua and the large-scale fracture control volumes are precisely calculated using the IEDFM. Empirical models are used to calculate the displacement of natural fractures, and analytical models are used to calculate the aperture changes of hydraulic fractures. The overall deformation of a fractured rock is described using an equivalent method. The coupled geomechanics-fluid flow system is discretized by the finite element-finite volume method (FV-FEM) and solved using the fixed-stress split iterative coupling approach.Several examples are presented to demonstrate the applicability of the proposed method. The hybrid model is first employed to simulate water flooding process in a naturally fractured reservoir with multi-scale fractures. Effects of different scales of fractures, geomechanics coupling and capillary pressure are investigated. A case of producing from horizontal well in a hydraulic fractured tight oil reservoir is then studied, where the hydraulic fractures are modeled explicitly using IEDFM and the stimulation areas around hydraulic fractures are modeled using DPDK. Effects of stimulation area size on the pressure depletion and on the stress evolution process in the reservoir are investigated.

A 2D continuous-discontinuous unified pore-fracture seepage model for hydro-mechanical coupling in the combined finite-discrete element method (FDEM) using node binding scheme

A 2D continuous-discrete mixed seepage model considering the fluid exchange and the pore pressure discontinuity across the fracture for simulating fluid-driven fracturing

A 2D Mixed Fracture–pore Seepage Model and Hydromechanical Coupling for Fractured Porous Media

A Discontinuous Discrete Fracture Model for Coupled Flow and Geomechanics Based on FEM

Coupled hydro-mechanical two-phase flow model in fractured porous medium with the combined finite-discrete element method

Coupled Geomechanics and Fluid Flow Modeling for Petroleum Reservoirs Accounting for Multi-Scale Fractures

Simulation of Permeability of Hydraulic Fractures by Computational Fluid Dynamics

A DEM–CFD Coupling Method for Modelling Two-Hole Synchronous Hydraulic Fracturing

A 2D, Fully-Coupled, Hydro-Mechanical, FDEM Formulation for Modelling Fracturing Processes in Discontinuous, Porous Rock Masses

A Fully Coupled Hydro-Mechanical Approach for Multi-Fracture Propagation Simulations

A Coupled Extended Finite Element Approach for Modeling Hydraulic Fracturing in Consideration of Proppant

A three-dimensional thermal-hydro-mechanical coupling model for simulation of fracturing driven by multiphysics

A Hybrid Finite Volume and Extended Finite Element Method for Hydraulic Fracturing with Cohesive Crack Propagation in Quasi-Brittle Materials

Poromechanical Modeling and Numerical Simulation of Hydraulic Fracture Propagation.

Hydraulic fracturing coupling model of rock mass based on extended finite element method

Numerical simulation of the fluid-solid coupling mechanism of water and mud inrush in a water-rich fault tunnel

A FDEM-based 2D coupled thermal-hydro-mechanical model for multiphysical simulation of rock fracturing

Hydraulic Fracture Simulation with Hydro-Mechanical Coupled Discretized Virtual Internal Bond

Modeling of heat transfer and thermal cracking in brittle materials using Finite-Discrete Element Method (FDEM) with a heat pipe model and node binding scheme

Hydro-mechanical Modeling of Impermeable Discontinuity in Rock by Extended Finite Element Method

Embedded Fracture Model for Coupled Flow and Geomechanics