Abstract:As one of the light materials with superior biocompatible properties, magnesium has drawn more attention in recent years. More industries, such as the automotive, aerospace, and medical, are adopting new strategies to employ this material. Mg-based batteries with potential advantages over Li-based batteries are also predicted to be used in electric vehicles shortly. However, significant problems in the production of Mg, such as its low ductility at ambient temperature and high oxidation and flammability at high operating temperatures, have limited its application. Therefore, selecting an appropriate manufacturing method can lessen or resolve Mg's drawbacks. Castings, different traditional forming and Severe Plastic Deformation (SPD) methods, and alloying of Mg with other elements are among the most popular fabrication and processing techniques to improve Mg properties and expand its application. However, as an innovative Additive Manufacturing (AM) method, the Selective Laser Melting (SLM) is considered a more reliable way of producing Mg-based products, especially for applications with complex geometry design, the least amount of waste, and no need for molds and accessories. Of course, SLM also has its challenges, such as the strong dependence of the properties on printing parameters and the raw material; however, apparent horizons can be imagined for SLM of Mg according to recent developments and research. This paper summarizes the SLM of Mg by introducing the SLM parameters, properties, defects, and applications of SLMed Mg alloys and discussing the challenges and solutions of this method. The impact of the SLM parameters and initial Mg powder characteristics as the primary inputs of this method on the resultant properties of the SLMed Mg components and the potential defects are thoroughly discussed. The thermal zones produced in the SLM process of Mg are divided into four categories, which are strongly influenced by the printing parameters and, on the other hand, affect the quality of the final product so that a high relative density of 99% and the much better mechanical and microstructural properties than those produced via other conventional methods, such as casting are achieved by adjusting the printing parameters. The characterization of the primary powder is divided into two categories: morphology and particle size, along with chemical composition. Morphology and chemical composition play an essential role in the final part by affecting the alloy's flowability, oxidation, and ignition. Characterization of properties is also reviewed in three general densifications, mechanical properties, and microstructure of SLMed samples and their dependence on parameters and input materials. Finally, the defects and challenges are briefly discussed, and the applications of Mg alloys in two widely used areas, including automotive and medicine, are presented.

Additive manufacturing of ZK60 magnesium alloy by selective laser melting: Parameter optimization, microstructure and biodegradability

Additive manufacturing of biodegradable Zn-xMg alloys: Effect of Mg content on manufacturability, microstructure and mechanical properties

A study of selective laser melting process for pure zinc and Zn10mg alloy on process parameters and mechanical properties

A detailed microstructural and corrosion analysis of an additively manufactured magnesium alloy produced by selective laser melting

In Vitro Degradation Performance and Biological Response of a Mg–Zn–Zr Alloy

Effects of magnesium on microstructure, properties and degradation behaviors of zinc-based alloys prepared by selective laser melting

Laser additive manufacturing of Zn metal parts for biodegradable applications: Processing, formation quality and mechanical properties

Investigation on the preparation, microstructure, mechanical and degradation properties of laser additive manufactured Zn-Li-Mg alloy for bioresorbable application

Effects of processing parameters on fabrication defects, microstructure and mechanical properties of additive manufactured Mg–Nd–Zn–Zr alloy by selective laser melting process

Study on Porous Mg-Zn-Zr ZK61 Alloys Produced by Laser Additive Manufacturing

Development of manufacturing method of the MAP21 magnesium alloy prepared by selective laser melting (SLM)

Selective laser melted AZ91D magnesium alloy with superior balance of strength and ductility

Microstructure evolution and ductility improvement of additively manufactured biodegradable zinc–magnesium alloys via annealing

Surface design of Mg-Zn alloy temporary orthopaedic implants: Tailoring wettability and biodegradability using laser surface melting

Research progress on selective laser melting (SLM) of magnesium alloys: A review

Quasicrystal-strengthened biomedical magnesium alloy fabricated by laser additive manufacturing

Effect of heat treatment on mechanical and biodegradable properties of an extruded ZK60 alloy

Surface modification of biomedical Mg-Ca and Mg-Zn-Ca alloys using selective laser melting: Corrosion behaviour, microhardness and biocompatibility

Review of Selective Laser Melting of Magnesium Alloys: Advantages, Microstructure and Mechanical Characterizations, Defects, Challenges, and Applications

In vitro degradation and biocompatibility of WE43, ZK60, and AZ91 biodegradable magnesium alloys

Microstructure and mechanical properties of high strength Mg−15Gd−1Zn−0.4Zr alloy additive-manufactured by selective laser melting process