Abstract:Constructing a rational electrode structure for supercapacitors is critical to accelerate the electrochemical kinetics process and thus promote the capacitance. Focusing on the flexible supercapacitor electrode, we synthesized a three-dimensional (3D) porous polypyrrole (PPy) film using a modified vapor phase polymerization method with the use of a porous template (CaCO3). The porous design provided the PPy film with an improved surface area and pore volume. The porous PPy film electrode was studied as a binder-free electrode for supercapacitors. It was found that the abundant interpenetrated pores created by the CaCO3 templates within the 3D framework are beneficial to overcoming the diffusion-controlled limit in the overall electrochemical process. It was revealed by electrochemical investigation that a more pseudocapacitive contribution than diffusion-controlled process contribution was observed in the total charge in the redox reaction. The galvanostatic charge/discharge (GCD) measurements showed that the optimized 3D porous PPy film electrode delivered a high capacitance of 313.6 F g–1 and an areal capacitance of 98.0 mF cm–2 at 1.0 A g–1 in a three-electrode configuration, which is nearly three times that of the dense counterpart electrode synthesized in the absence of the CaCO3 template. A specific capacitance of 62.5 F g–1 at 0.5 A g–1 and 31.1 F g–1 at 10 A g–1 was obtained in a symmetric capacitor device. In addition, the porous structure provided the PPy film with the attractive capability of accommodating the volume change during the doping/dedoping process. This is essential for the PPy film to maintain a long cycling life in a practical operation for a supercapacitor. It turned out that a high capacitance retention up to 81.3% after 10,000 GCD cycles was obtained for the symmetric supercapacitor device with the 3D porous PPy electrode (57.1% capacitive retention was observed for the dense PPy electrode). The strategy and the insight analysis are expected to provide valuable guidance for the design and the synthesis of flexible and wearable film electrodes with high performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03553?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03553</a>.SEM images of CaCO3 particles; digital images of the PPy-1.5 and the dense PPy films; XRD patterns of the PPy-1.5 and the dense PPy films; N2 adsorption/desorption isotherm linear plots, BJH (desorption) pore volume and pore size curves of the PPy-1.5 and the dense PPy films; linear fittings of the peak currents as a function of the scan rates in their corresponding CV curves for various electrodes; b slopes obtained from fitted results; electrochemical measurements of the dense PPy electrode; CV curves of the dense PPy symmetric device; rate performance comparison of the PPy-1.5 and the dense PPy film electrodes; equivalent circuit for the EIS fitting; fitted parameters from Nyquist; and SEM images of the PPy-1.5 film and the dense PPy film disassembled from the devices after the cycling test (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03553/suppl_file/am1c03553_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Cover Feature: An Efficient Electrochromic Supercapacitor Based on Solution‐Processable Nanoporous Poly{tris[4‐(3,4‐ethylenedioxythiophene)phenyl]amine} (ChemSusChem 15/2020)

Cover Feature: All‐Solid‐State Lithium–Organic Batteries Comprising Single‐Ion Polymer Nanoparticle Electrolytes (chemsuschem 9/2020)

A colorless to multicolored triphenylamine-based polymer for the visualization of high-performance electrochromic supercapacitor

Asymmetric supercapacitor devices based on dendritic conducting polymer and activated carbon

Flexible Asymmetric Supercapacitors Via Spray Coating of a New Electrochromic Donor–Acceptor Polymer

Interface Guide: In-situ Integrating MoS2 Nanosheets into Highly Ordered Polypyrrole Film for High Performance Flexible Supercapacitor Electrodes

Solution-processable, hypercrosslinked polymer via post-crosslinking for electrochromic supercapacitor with outstanding electrochemical stability

Carbon Nanotube Template‐Assisted Synthesis of Conjugated Microporous Polytriphenylamine with High Porosity for Efficient Supercapacitive Energy Storage

Cover Feature: Electrochemical Performance Optimization of Layered P2-Type Na0.67MnO2 through Simultaneous Mn-Site Doping and Nanostructure Engineering (Batteries & Supercaps 2/2020)

Interfacial modulation strategy using poly(3,4-ethylenedioxythiophene)-poly(4-styrenesulfonate) (PEDOT:PSS) and ultrathin two-dimensional metal-organic framework nanosheets for wearable supercapacitors: Solution engineering

High-performance electrochromic supercapacitor based on polyoxotitanates/conjugated polymer hybrid films for visualization for the energy status

Cover Feature: A Low‐Energy‐Gap Thienochrysenocarbazole Dye for Highly Efficient Mesoscopic Titania Solar Cells: Understanding the Excited State and Charge Carrier Dynamics (ChemSusChem 9/2018)

Structural Tuning of a Flexible and Porous Polypyrrole Film by a Template-Assisted Method for Enhanced Capacitance for Supercapacitor Applications

Development of Supercapacitors with 3D Porous Structures

Flexible Ti3C2Tx/PEDOT:PSS Films with Outstanding Volumetric Capacitance for Asymmetric Supercapacitors.

Template‐free electrochemically polymerized polypyrrole nanowires and their application in flexible solid‐state supercapacitors

p-conjugated polymer nanocomposite for high-performance organic supercapacitor electrodes †

Conductive MXene/Polymer Composites for Transparent Flexible Supercapacitors

Facile Synthesis of Molybdenum Disulfide/poly (3,4-Ethylenedioxythiophene) Composite Electrodes for High-Performance Flexible Supercapacitors

Stable Three-Dimensional PEDOT Network Construction for Electrochromic-Supercapacitor Dual Functional Application

Cover Feature: Vertically Aligned Co9S8 Nanotube Arrays onto Graphene Papers as High‐Performance Flexible Electrodes for Supercapacitors (Chem. Eur. J. 10/2018)