Abstract:In recent years, P2-layered manganese-based cathodes have garnered considerable attention because of their exceptional capacity, high energy density, and facile synthesis. Nevertheless, the poor rate capability and inferior capacity retention at high discharge rates have limited their application in commercial batteries. In this work, we report a stable P2-type Na0.62K0.05Mn0.67Ni0.17Mg0.11Zn0.05O2 layered oxide cathode material with both alkali metal site doping and transition metal site doping and confirm that the synergistic effect of the K–Mg–Zn system suppresses the phase transition of P2–O2 and reduces the activation energy of interfacial charge transfer. Furthermore, the introduction of the K–Mg–Zn system results in favorable cycling stability rate performance of the sample. Specifically, the initial discharge capacity at 0.1C is measured to 140.9 mAh g–1, with a capacity retention of 95.1% after 100 cycles at 1C. Remarkably, even after 2000 cycles at 20C, the capacity retention remains at 82.8%. Ex situ X-ray photoelectron spectroscopy (XPS) analysis and the density functional theory (DFT) calculation reveal that the charge compensation during the KNMMZ charging and discharging process can be interpreted as the cooperative action of Mn3+/Mn4+ and Ni2+/Ni3+/Ni4+ redox couples in the voltage range of 2–4 V, while peaks around 4.2 V are attributed to the anionic redox action. Ex situ X-ray diffraction (XRD) analysis reveals the pronounced capability of KNMMZ to effectively suppress the P2–O2 phase transition. The complex impedance measurements and the galvanostatic intermittent titration technique validate that the K–Mg–Zn system enhances the diffusion of sodium ions. Furthermore, the full cell demonstrates outstanding cyclic electrochemical performance, underscoring its exceptional stability and durability throughout multiple charge–discharge cycles. Consequently, the P2-type Na0.62K0.05Mn0.67Ni0.17Mg0.11Zn0.05O2 system presents promising prospects for the advancement of high-energy SIBs in practical applications.

Cover Feature: Electrochemical Performance Optimization of Layered P2-Type Na0.67MnO2 through Simultaneous Mn-Site Doping and Nanostructure Engineering (Batteries & Supercaps 2/2020)

Electrochemical Performance Optimization of Layered P2‐Type Na0.67MnO2 Through Simultaneous Mn‐Site Doping and Nanostructure Engineering

Cover Feature: All‐Solid‐State Lithium–Organic Batteries Comprising Single‐Ion Polymer Nanoparticle Electrolytes (chemsuschem 9/2020)

Shape‐Induced Kinetics Enhancement in Layered P2‐Na 0.67 Ni 0.33 Mn 0.67 O 2 Porous Microcuboids Enables High Energy/Power Sodium‐Ion Full Battery

Designing High-Performance Nanostructured P2-type Cathode Based on a Template-free Modified Pechini Method for Sodium-Ion Batteries

Designing Water/air-Stable P2-layered Cathodes with Delayed P2–O2 Phase Transition by Composition and Structure Engineering for Sodium-Ion Batteries at High Voltage

Cover Feature: Synthesis of CoS <sub>2</sub> Nanoparticles/Nitrogen‐Doped Graphitic Carbon/Carbon Nanotubes Composite as an Advanced Anode for Sodium‐Ion Batteries (ChemElectroChem 13/2020)

Shape-Induced Kinetics Enhancement In Layered P2-Na0.67ni0.33mn0.67o2 Porous Microcuboids Enables High Energy/Power Sodium-Ion Full Battery

Cover Feature: Preparation, Lithium Storage Performance and Thermal Stability of Nickel‐Rich Layered LiNi0.815Co0.15Al0.035O2/RGO Composites (ChemElectroChem 21/2018)

Electrochemical Mechanism Analysis of Dual-Site Doped on P2-Na 2/3 Ni 1/3 Mn 2/3 O 2 Enabling Anionic and Cationic Redox with Excellent Electrochemical Performance

Cover Feature: Molybdenum Sulfide Nanoflowers as Electrodes for Efficient and Scalable Lithium‐Ion Capacitors (Chem. Eur. J. 40/2024)

The Interaction Between Cu and Fe in P2-Type NaxTMO2 Cathodes for Advanced Battery Performance

P3-type layered Na0.26Co1−xMnxO2 cathode induced by Mn doping for high-performance sodium-ion batteries

Cover Feature: Sulfur/Nitrogen Co‐Doped In‐Plane Porous Carbon Nanosheets As Superior Anode of Potassium‐Ion Batteries (batteries & Supercaps 5/2022)

Promoting the Performances of P2-type Sodium Layered Cathode by Inducing Na Site Rearrangement

A Collaborative Strategy with Ionic Conductive Na2SiO3 Coating and Si Doping of P2-Na0.67Fe0.5Mn0.5O2 Cathode: an Effective Solution to Capacity Attenuation

Tuning local chemistry of P2 layered-oxide cathode for high energy and long cycles of sodium-ion battery

A Novel Pentanary Metal Oxide Cathode with P2/O3 Biphasic Structure for High‐Performance Sodium‐Ion Batteries

Cover Feature: Network‐Like Ni 1−x Mo X Nanosheets: Multi‐Functional Electrodes for Overall Water Splitting and Supercapacitor (chemelectrochem 5/2019)

Suppressing the P2‐O2 phase transition and Na+/vacancy ordering in Na0.67Ni0.33Mn0.67O2 by a delicate multicomponent modulation strategy

High Performance P2-Type Na2/3(Mn1/2Fe1/4Co1/4)O2 Cathode Material with Superior Rate Capability for Na-Ion Batteries