Tuning local chemistry of P2 layered-oxide cathode for high energy and long cycles of sodium-ion battery

Chenchen Wang,Luojia Liu,Shuo Zhao,Yanchen Liu,Yubo Yang,Haijun Yu,Suwon Lee,Gi-Hyeok Lee,Yong-Mook Kang,Rong Liu,Fujun Li,Jun Chen

DOI: https://doi.org/10.1038/s41467-021-22523-3

IF: 16.6

2021-04-15

Nature Communications

Abstract:Abstract Layered transition-metal oxides have attracted intensive interest for cathode materials of sodium-ion batteries. However, they are hindered by the limited capacity and inferior phase transition due to the gliding of transition-metal layers upon Na + extraction and insertion in the cathode materials. Here, we report that the large-sized K + is riveted in the prismatic Na + sites of P2-Na 0.612 K 0.056 MnO 2 to enable more thermodynamically favorable Na + vacancies. The Mn-O bonds are reinforced to reduce phase transition during charge and discharge. 0.901 Na + per formula are reversibly extracted and inserted, in which only the two-phase transition of P2 ↔ P’2 occurs at low voltages. It exhibits the highest specific capacity of 240.5 mAh g −1 and energy density of 654 Wh kg −1 based on the redox of Mn 3+ /Mn 4+ , and a capacity retention of 98.2% after 100 cycles. This investigation will shed lights on the tuneable chemical environments of transition-metal oxides for advanced cathode materials and promote the development of sodium-ion batteries.

multidisciplinary sciences

What problem does this paper attempt to address?

This paper attempts to solve the problems of limited capacity and unstable phase transformation of cathode materials in sodium - ion batteries (SIBs) during the cycling process. Specifically, as cathode materials for SIBs, layered transition - metal oxides have limited capacity and poor phase - transformation performance due to the slippage of transition - metal layers caused by the extraction and insertion of sodium ions (Na⁺). In this paper, larger - sized potassium ions (K⁺) are introduced into P2 - type sodium manganese oxides to enhance the structural stability of the materials and improve their electrochemical performance.

### Core Problems of the Paper

1. **Limited Capacity**: The capacity of traditional layered transition - metal - oxide cathode materials in sodium - ion batteries is limited.
2. **Unstable Phase Transformation**: During the extraction and insertion of sodium ions, the transition - metal layers will slip, leading to phase transformation and thus affecting the cycling stability of the battery.

### Solutions

1. **Introduction of Potassium Ions (K⁺)**: By introducing larger - sized potassium ions (K⁺) into P2 - type sodium manganese oxides and making them fixed in the hexagonal - prismatic sodium - ion sites, the formation energy of sodium - ion vacancies can be reduced, allowing more sodium ions to be extracted and inserted.
2. **Enhancement of Structural Stability**: The introduction of potassium ions enhances the structural stability of the manganese - oxygen octahedral layers and reduces the occurrence of phase transformation, especially at high voltages.

### Experimental Results

- **High Reversible Capacity**: P2 - Na₀.₆₁₂K₀.₀₅₆MnO₂ exhibits the highest reversible capacity, reaching 240.5 mAh g⁻¹, which is equivalent to the reversible extraction and insertion of 0.901 sodium ions per formula unit.
- **High Energy Density**: Based on the Mn³⁺/Mn⁴⁺ redox reaction, the energy density reaches 654 Wh kg⁻¹.
- **Good Cycling Stability**: After 100 cycles, the capacity retention rate is 98.2%, and the capacity loss per cycle is only 0.018%.

### Conclusion

By finely tuning the local chemical environment, especially by introducing potassium ions, the electrochemical performance of cathode materials for sodium - ion batteries can be significantly improved, including high capacity, high energy density, and long cycle life. This strategy provides a new idea for designing high - performance cathode materials for sodium - ion batteries.