Alumina coatings on Ni-based superalloys: The impact of annealing on heavy oil fouling

Fellipy S. Rocha,Etienne Bousser,Marwan Azzi,Fadila Khelfaoui,Luc Vernhes,Gregory S. Patience,Jolanta E. Klemberg-Sapieha,Ludvik Martinu
DOI: https://doi.org/10.1016/j.surfcoat.2024.131266
IF: 4.865
2024-08-26
Surface and Coatings Technology
Abstract:As the sweet crude oil reserves decline, refiners must treat sulfur-rich heavy oil, requiring harsher operating conditions, which are detrimental to process equipment. Application of coatings on critical components protects surfaces against sulfidation, corrosion, and fouling, extends the equipment's lifetime, and reduces the frequency of costly turnarounds. In the present work, we coated Inconel 625 and Inconel 718 substrates with amorphous alumina thin films at room temperature using reactive RF magnetron sputtering. Annealing of the deposited coatings at 800, 900, and 1000 °C increased hardness, improved adhesion, and generated crystalline polymorphs, predominantly γ-Al 2 O 3 at lower temperatures, while α-Al 2 O 3 was present at 1000 °C. The annealed substrates formed thermally grown oxides (TGOs), which interacted with the alumina coatings. The TGOs followed grain boundaries in the case of IN718 and a crater-like pattern on IN625. Annealed substrate precipitates generated columnar-like protrusions responsible for inducing crack propagation, which presented TGO formation. After 2 h exposure to heavy oil (containing 0.06 g g −1 sulfur) at 450 °C and 11.3 MPa the as-deposited amorphous alumina presented no clear sign of adherent fouling, while the 1000 °C annealed crystalline alumina surfaces presented evidence of fouling.
physics, applied,materials science, coatings & films
What problem does this paper attempt to address?