Abstract:The compressive mechanical properties of concrete-based materials are strongly affected by the presence of additions in the mix and load application velocity. Fiber-Reinforced Rubberized Concrete (FRRC) was recently proposed in the literature as a concrete-based material with the aim of obtaining a ductile material with reduced environmental burden and characterized by excellent energy absorption performances during impact loading. FRRC joins and balances the advantages and drawbacks of Fiber Reinforce Concrete (FRC) and Rubberized Concrete (RuC). However, its behavior has rarely been investigated under dynamic loadings, although gaining sufficient knowledge on their high strain rate behavior is crucial for their full-scale application. This study aims to investigate the high-strain rate compressive behavior of FRRC with fine rubber aggregates and micro-straight steel fibers. Tests were performed using conventional quasi-static loading with a compressive testing machine and high-strain rate tests with a 080-mm Split Hopkinson Pressure Bar (SHPB) for strain rates up to 200 s(-1). The experimental program comprises the characterization of Plain Concrete (PC), FRC, RuC, and FRRC with a full test matrix (a total of 192 specimens) covering fiber contents up to 1.5% and rubber volume substitution ratios up to 30%. The micro-scale characterization of the material using SEM scans provided a complete understanding of the observed macro-scale behavior. A high-speed camera was used to capture the cracking development processes. The measurements both for quasi-static and dynamic tests indicate that the addition of fibers improves the ductility or toughness with a slight increase in the compressive strength and the substitution with rubber aggregates significantly reduces the compressive strength with improved ductility or toughness. The combination of fiber and rubber (FRRC) leads to a combination of the previously described single marginal effects. The dynamic tests reveal the marked strain rate dependency, although specimens with large rubber volume substitution were more sensitive to the strain rate effect within the considered test range. Based on the test data, data-driven models for strength reduction factor (SRF) and dynamic increase factor (DIF) are proposed for different types of FRRC. The image-based waveform discussion provides evidence of the "double-peak" phenomenon highlighting the different features of the observed signals and damage evolution. Ultimately, this study indicates that FRRC has an excellent high-strain rate compressive behavior and can be a promising material to be employed to protect structures against impact and blast loads.

Effect of different loading rates on the fracture behavior of FRP‐reinforced concrete

Dynamic Behavior of CFRP-Strengthened Reinforced Concrete Beams Without Stirrups under Impact Loading

Tests for anti-shear failure mechanism of CFRP-strengthened RC Beams without Stirrups under impact loading

High-strain rate compressive behavior of Fiber-Reinforced Rubberized Concrete

Fracturing behaviors of FRP-strengthened concrete structures

Effect of initial crack‐depth ratio on fracture characteristics of FRP‐strengthened concrete

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Cracking Behavior of Cfrp Laminate-Strengthened Rc Beams with Premechanical and Postmechanical Environmental Damage

Low cycle fatigue crack propagation and damage evolution of concrete beams reinforced with GFRP bar

Behavior of Preloaded RC Beams Strengthened with CFRP Laminates

Effect of Shear Resistance on Flexural Debonding Load-Carrying Capacity of RC Beams Strengthened with Externally Bonded FRP Composites

Fracture Property of Steel Fiber Reinforced Concrete at Early Age

Study on flexural performance of cracked RC beams retrofitted with CFRP sheets

Predicting deflection of retrofitted reinforced concrete beams

Experimental study on the flexural performance of FRP grid-reinforced ultra-high-performance concrete I-beams with different steel fiber contents

Influence of Loading Rate on Dynamic Fracture Behavior of Fiber-Reinforced Composites

Loading Rate Effect on the Double-K Fracture Parameters of Concrete

Loading rate effect on fracture behavior of fiber reinforced high strength concrete using a semi-circular bending test

Experimental and Theoretical Study on Flexural Behavior of GFRP- and CFRP-Reinforced Concrete Beams after High-Temperature Exposure

Refined Modeling of the Interfacial Behavior Between FRP Bars and Concrete under Different Loading Rates

Research on the Fracture Behavior of Steel-Fiber-Reinforced High-Strength Concrete