Abstract:In this study, a carbon electrode was synthesized from carbon black (CB), reduced graphene oxide (rGO), and polyurethane (PU) and subsequently used as the collector for electrospinning. During electrospinning, nanofibers were deposited on the carbon film collector. The carbon electrode and the deposited nanofibers together formed a nanofiber carbon electrode. Finally, a stretchable and flexible nanofiber membrane-sensing electrode was successfully developed and applied in smart clothing for ECG and EMG monitoring. The nanofibers were generated from polyvinylidene difluoride (PVDF) and poly (3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT/PSS) via mixing and electrospinning. The addition of a conductive PEDOT/PSS polymer inhibited the formation of beads on the fiber and enhanced the integrity as well as the electrical conductivity of the fiber. In addition, a CB/rGO carbon film was used as the electrospinning collector. The addition of a dispersant to the carbon film improved its electrical conductivity as well as its stretchability. The results show that the nanofiber carbon electrode prepared by electrospinning exhibits a high electrical conductivity (surface resistance = 2.5 × 10<sup>1</sup> Ω/sq), high mechanical durability (a stable circuit was maintained after 3000 repeated uses), and a hydrophobic surface (water contact angle = 146°). Compared with a traditional commercial wet electrode (Ag/AgCl), the nanofiber carbon electrode developed in this study exhibited good contact with human skin and excellent durability. These merits make the nanofiber carbon electrode suitable for long-term biological signal recording. Furthermore, such an electrode can be integrated into wearable systems for healthcare monitoring.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaelm.0c00841?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaelm.0c00841</a>.FE-SEM micrographs of the powder form of carbon black and reduce graphene oxide; synthetic scheme for converting styrene-maleic anhydride and polyetheramine to the SMA-derived amido acid as the polymeric dispersants; FTIR spectra collected for validating the synthesis of SMA-M1000 copolymer; solubility test of the SMA-M1000 copolymer in different solvents; FE-SEM image of the CB/rGO/SMA-M1000 with three different weight ratio; surface resistance test of the CB/rGO/PU film; UV–vis spectra and the absorption coefficient results; FT-IR spectra and Raman analysis of SMA-M1000, rGO and rGO; EDS element analysis; relationship between the tensile stress and strain of carbon electrode and nano-fiber carbon electrode; plot of relative resistance change of carbon electrode and nano-fiber carbon electrode as a function of strain; GPC analysis results of the SMA-M1000 copolymer dispersant; solubility test results of the SMA-M1000 copolymer dispersant in different solvents; comparing the performance of present fiber electrode with those reported in the literature (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00841/suppl_file/el0c00841_si_001.pdf">PDF</a>)Mechanical stability of flexible electrodes: highly sensitive electrocardiogram and electromyography measurements (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00841/suppl_file/el0c00841_si_002.mp4">MP4</a>)This article has not yet been cited by other publications.

Rapid Fabrication Technique for Dry Electrocardiography Electrodes Using Carbon Nanotube/Polydimethylsiloxane Composite

Fabrication and Characterization of Free-Standing and Flexible Polyaniline Membranes: Role of Graphene Nanoscrolls

PEDOT:PSS Hydrogel based Flexible Electrodes for Wearable ECG Monitoring

A Smart Electrolyte-Replenishing Semi-Dry Electrode Based on a Temperature-Responsive Hydrogel for Sustainable Electrophysiological Signal Acquisition

Flexible Carbon Nanotube-Based Polymer Electrode For Long-Term Electrocardiographic Recording

PDMS/CNT electrodes with bioamplifier for practical in-the-ear and conventional biosignal recordings

Solvent-Free and Cost-Efficient Fabrication of a High-Performance Nanocomposite Sensor for Recording of Electrophysiological Signals

Flexible and robust dry electrodes based on electroconductive polymer spray-coated 3D porous graphene for long-term electrocardiogram signal monitoring system

Simple and cost-effective method of highly conductive and elastic carbon nanotube/polydimethylsiloxane composite for wearable electronics

Flexible Dry Electrode Based on a Wrinkled Surface That Uses Carbon Nanotube/Polymer Composites for Recording Electroencephalograms

Facile Fabrication of Robust and Reusable PDMS Supported Graphene Dry Electrodes for Wearable Electrocardiogram Monitoring

Flexible PDMS Composite Electrodes with Boronic Acid-Modified Carbon Dots for Surface Electrophysiological Signal Recording

Rapid Fabrication of Low Impedance, 3D Dry Electrodes for Physiological Sensing

A flexible semidry electrode for long-term, high-quality electrocardiogram monitoring

Facile Fabrication of a Stretchable and Flexible Nanofiber Carbon Film-Sensing Electrode by Electrospinning and Its Application in Smart Clothing for ECG and EMG Monitoring

A PDMS-based microneedle array electrode for long-term ECG recording

Electrospun Rubber Nanofiber Web-Based Dry Electrodes for Biopotential Monitoring

Highly Uniform, Flexible Microelectrodes Based on the Clean Single-Walled Carbon Nanotube Thin Film with High Electrochemical Activity

Continuous Biopotential Monitoring via Carbon Nanotubes Paper Composites (CPC) for Sustainable Health Analysis

Photocurable 3D-printed AgNPs/Graphene/Polymer nanocomposites with high flexibility and stretchability for ECG and EMG smart clothing

Advanced electrospun AgNPs/rGO/PEDOT:PSS/TPU nanofiber electrodes: Stretchable, self-healing, and perspiration-resistant wearable devices for enhanced ECG and EMG monitoring