Facile Fabrication of a Stretchable and Flexible Nanofiber Carbon Film-Sensing Electrode by Electrospinning and Its Application in Smart Clothing for ECG and EMG Monitoring

Chen-Yang Huang,Chih-Wei Chiu
DOI: https://doi.org/10.1021/acsaelm.0c00841
IF: 4.494
2021-01-15
ACS Applied Electronic Materials
Abstract:In this study, a carbon electrode was synthesized from carbon black (CB), reduced graphene oxide (rGO), and polyurethane (PU) and subsequently used as the collector for electrospinning. During electrospinning, nanofibers were deposited on the carbon film collector. The carbon electrode and the deposited nanofibers together formed a nanofiber carbon electrode. Finally, a stretchable and flexible nanofiber membrane-sensing electrode was successfully developed and applied in smart clothing for ECG and EMG monitoring. The nanofibers were generated from polyvinylidene difluoride (PVDF) and poly (3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT/PSS) via mixing and electrospinning. The addition of a conductive PEDOT/PSS polymer inhibited the formation of beads on the fiber and enhanced the integrity as well as the electrical conductivity of the fiber. In addition, a CB/rGO carbon film was used as the electrospinning collector. The addition of a dispersant to the carbon film improved its electrical conductivity as well as its stretchability. The results show that the nanofiber carbon electrode prepared by electrospinning exhibits a high electrical conductivity (surface resistance = 2.5 × 10<sup>1</sup> Ω/sq), high mechanical durability (a stable circuit was maintained after 3000 repeated uses), and a hydrophobic surface (water contact angle = 146°). Compared with a traditional commercial wet electrode (Ag/AgCl), the nanofiber carbon electrode developed in this study exhibited good contact with human skin and excellent durability. These merits make the nanofiber carbon electrode suitable for long-term biological signal recording. Furthermore, such an electrode can be integrated into wearable systems for healthcare monitoring.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaelm.0c00841?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaelm.0c00841</a>.FE-SEM micrographs of the powder form of carbon black and reduce graphene oxide; synthetic scheme for converting styrene-maleic anhydride and polyetheramine to the SMA-derived amido acid as the polymeric dispersants; FTIR spectra collected for validating the synthesis of SMA-M1000 copolymer; solubility test of the SMA-M1000 copolymer in different solvents; FE-SEM image of the CB/rGO/SMA-M1000 with three different weight ratio; surface resistance test of the CB/rGO/PU film; UV–vis spectra and the absorption coefficient results; FT-IR spectra and Raman analysis of SMA-M1000, rGO and rGO; EDS element analysis; relationship between the tensile stress and strain of carbon electrode and nano-fiber carbon electrode; plot of relative resistance change of carbon electrode and nano-fiber carbon electrode as a function of strain; GPC analysis results of the SMA-M1000 copolymer dispersant; solubility test results of the SMA-M1000 copolymer dispersant in different solvents; comparing the performance of present fiber electrode with those reported in the literature (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00841/suppl_file/el0c00841_si_001.pdf">PDF</a>)Mechanical stability of flexible electrodes: highly sensitive electrocardiogram and electromyography measurements (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00841/suppl_file/el0c00841_si_002.mp4">MP4</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,engineering, electrical & electronic
What problem does this paper attempt to address?