Abstract:In this study, a carbon electrode was synthesized from carbon black (CB), reduced graphene oxide (rGO), and polyurethane (PU) and subsequently used as the collector for electrospinning. During electrospinning, nanofibers were deposited on the carbon film collector. The carbon electrode and the deposited nanofibers together formed a nanofiber carbon electrode. Finally, a stretchable and flexible nanofiber membrane-sensing electrode was successfully developed and applied in smart clothing for ECG and EMG monitoring. The nanofibers were generated from polyvinylidene difluoride (PVDF) and poly (3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT/PSS) via mixing and electrospinning. The addition of a conductive PEDOT/PSS polymer inhibited the formation of beads on the fiber and enhanced the integrity as well as the electrical conductivity of the fiber. In addition, a CB/rGO carbon film was used as the electrospinning collector. The addition of a dispersant to the carbon film improved its electrical conductivity as well as its stretchability. The results show that the nanofiber carbon electrode prepared by electrospinning exhibits a high electrical conductivity (surface resistance = 2.5 × 10<sup>1</sup> Ω/sq), high mechanical durability (a stable circuit was maintained after 3000 repeated uses), and a hydrophobic surface (water contact angle = 146°). Compared with a traditional commercial wet electrode (Ag/AgCl), the nanofiber carbon electrode developed in this study exhibited good contact with human skin and excellent durability. These merits make the nanofiber carbon electrode suitable for long-term biological signal recording. Furthermore, such an electrode can be integrated into wearable systems for healthcare monitoring.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaelm.0c00841?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaelm.0c00841</a>.FE-SEM micrographs of the powder form of carbon black and reduce graphene oxide; synthetic scheme for converting styrene-maleic anhydride and polyetheramine to the SMA-derived amido acid as the polymeric dispersants; FTIR spectra collected for validating the synthesis of SMA-M1000 copolymer; solubility test of the SMA-M1000 copolymer in different solvents; FE-SEM image of the CB/rGO/SMA-M1000 with three different weight ratio; surface resistance test of the CB/rGO/PU film; UV–vis spectra and the absorption coefficient results; FT-IR spectra and Raman analysis of SMA-M1000, rGO and rGO; EDS element analysis; relationship between the tensile stress and strain of carbon electrode and nano-fiber carbon electrode; plot of relative resistance change of carbon electrode and nano-fiber carbon electrode as a function of strain; GPC analysis results of the SMA-M1000 copolymer dispersant; solubility test results of the SMA-M1000 copolymer dispersant in different solvents; comparing the performance of present fiber electrode with those reported in the literature (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00841/suppl_file/el0c00841_si_001.pdf">PDF</a>)Mechanical stability of flexible electrodes: highly sensitive electrocardiogram and electromyography measurements (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00841/suppl_file/el0c00841_si_002.mp4">MP4</a>)This article has not yet been cited by other publications.

Photocurable 3D-printed AgNPs/Graphene/Polymer nanocomposites with high flexibility and stretchability for ECG and EMG smart clothing

PEDOT:PSS Hydrogel based Flexible Electrodes for Wearable ECG Monitoring

Advanced electrospun AgNPs/rGO/PEDOT:PSS/TPU nanofiber electrodes: Stretchable, self-healing, and perspiration-resistant wearable devices for enhanced ECG and EMG monitoring

Facile Fabrication of a Stretchable and Flexible Nanofiber Carbon Film-Sensing Electrode by Electrospinning and Its Application in Smart Clothing for ECG and EMG Monitoring

6.2: <i>Invited Paper:</i> Wearable and Printable Sensors for Human Healthcare Monitoring

Controlling the Structures, Flexibility, Conductivity Stability of Three-Dimensional Conductive Networks of Silver Nanoparticles/Carbon-Based Nanomaterials with Nanodispersion and their Application in Wearable Electronic Sensors

A Stretchable and Sweat-Adhesive 3D Graphene Eutectogel Electrode for EMG Monitoring

Highly Skin-Compliant Polymeric Electrodes with Synergistically Boosted Conductivity Toward Wearable Health Monitoring.

Multi‐material direct‐ink‐writing of silver‐based flexible and highly deformable dry electrocardiogram biopatches

Highly conductive, stretchable, durable, skin-conformal dry electrodes based on thermoplastic elastomer-embedded 3D porous graphene for multifunctional wearable bioelectronics

Gold and silver nanocomposite-based biostable and biocompatible electronic textile for wearable electromyographic biosensors

Flexible and Stretchable Dry Active Electrodes With PDMS and Silver Flakes for Bio-Potentials Sensing Systems

Integrated dry poly(3,4-ethylenedioxythiophene):polystyrene sulfonate electrodes on finished textiles for continuous and simultaneous monitoring of electrocardiogram, electromyogram and electrodermal activity

Stretchable screen-printed PEDOT:PSS electrodes for upper-arm surface electromyography

3D Printing of Robust High‐Performance Conducting Polymer Hydrogel‐Based Electrical Bioadhesive Interface for Soft Bioelectronics

Stretchable Ag/AgCl Nanowire Dry Electrodes for High-Quality Multimodal Bioelectronic Sensing

Wearable Electronics of Silver-Nanowire/Poly(dimethylsiloxane) Nanocomposite for Smart Clothing

Stretchable and Self-Healable Graphene–Polymer Conductive Composite for Wearable EMG Sensor

3D Printing of Ionic Conductors for High-Sensitivity Wearable Sensors

Stretchable Conductive Fabric Enabled by Surface Functionalization of Commercial Knitted Cloth

Flexible and robust dry electrodes based on electroconductive polymer spray-coated 3D porous graphene for long-term electrocardiogram signal monitoring system