Abstract:The heating problems in electronic devices have become even more significant with the development of technology and the rapid increase in areas of use. In cases where passive cooling and active cooling processes are not sufficient to improve overheating in electronic devices, high temperature generation is prevented by liquid cooling if convenient. The effect of nanofluid use on heat transfer to improve the thermal performance of liquid cooling systems was examined with computational fluid dynamics from numerical methods in this research. For different cooler designs, both single‐phase and multiphase modeling methods were utilized in fluid modeling in the research involving forced convection and heat transfer in laminar and turbulent flow. The mathematical models utilized were validated on different experimental and numerical researches. The single‐phase modeling was conducted for pure H2O, 1% Al2O3, 5% Al2O3 nanofluids at different Reynolds numbers. The analyzes were conducted at different Reynolds values and the increase in Reynolds value decreases the maximum temperature value at the output. In the multiphase modeling method, the nanofluid Al2O3 is defined and modelled as a separate phase suspended in different sizes into the base fluid H2O. The use of nanofluid increased the thermal conductivity in both methods compared to the use of pure H2O. At the same time, the use of nanofluids at 5% concentration gave better results than 1% concentration. As the temperature distributions are examined, the Mixture model, one of the single‐phase and multiphase modeling methods, presents very similar distributions. The effect of nanofluids on thermal performance varies depending on many parameters. A significant one is the size of the suspended nanoparticle. Different particle sizes, 20, 30, and 40 nm, were investigated in both Mixture and Eulerian modeling approaches in this research. Two different design coolers were utilized in the researches. In these designs, the flow is distributed in parallel and serpentine. The flow distribution and pressure drop also had an effect on thermal performance. The temperatures were read lower in the serpentine block, which provides a more regular flow distribution.

Enhancing cooling efficiency: Innovative geometric designs and mono-hybrid nanofluid applications in heat sinks

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

Nanofluids in microchannel heat sinks for efficient flow cooling of power electronic devices

Numerical study and optimization of thermal efficiency for a pin fin heatsink with nanofluid flow by modifying heatsink geometry

Heat transfer and flow characteristics of hybrid Al2O3/TiO2–water nanofluid in a minichannel heat sink

Analyzing Heat Transfer: Experimental and Theoretical Studies on Metal Oxide-Based Binary Nanofluid in Mini Hexagonal Tube Heat Sink

Insight into porous fin microchannel heat sinks with improved thermo-hydraulic performance

Numerical and experimental investigation of optimized heat sink designs for liquid cooling of a heterogeneous heating surface with multiple heat sources

Design of single and two phase modeled nanofluid CPU cooler and their numerical analysis

Solar radiation and heat sink impact on fluctuating mixed convective flow and heat rate of Darcian nanofluid: Applications in electronic cooling systems

Hydrothermal performance of mini-channel heat sink using nanofluids/hybrid nanofluids: A numerical study

Thermal performance improvement in water nanofluid/GNP–SDBS in novel design of double-layer microchannel heat sink with sinusoidal cavities and rectangular ribs

On the assessment of the thermal performance of microchannel heat sink with nanofluid

Performance investigation of normal channel facile heat sink using hybrid nanofluid: an experimental and numerical approach

Performance of heat sink using graphene nanoplatelets-H2O nanofluids for electronic cooling applications

Numerical investigation of thermal performance augmentation of nanofluid flow in microchannel heat sinks by using of novel nozzle structure: sinusoidal cavities and rectangular ribs

Thermal-hydraulic performance enhancement of modified hexagonal micro-Pin fin heat sinks using rotational configurations

Heat transfer enhancement using combined microchannel with vertical rectangular micro fins

Investigation of pin and perforated heatsink cooling efficiency and temperature distribution

Effect of a micro heat sink geometric design on thermo-hydraulic performance: A review

Optimization of heat dissipation in novel design wavy channel heat sinks for better performance