Abstract:The elastic properties of 1D nanostructures such as nanowires are often measured experimentally through actuation of the nanowire at its resonance frequency, and then relating the resonance frequency to the elastic stiffness using elementary beam theory. In the present work, we utilize large scale molecular dynamics simulations to report a novel beat phenomenon in [110] oriented Ag nanowires. The beat phenomenon is found to arise from the asymmetry of the lattice spacing in the orthogonal elementary directions of the [110] nanowire,i.e., [-110] and [001] directions, which results in two different principal moments of inertia. Because of this, actuations imposed along any other direction are found to decompose into two orthogonal vibrational components based on the actuation angle relative to these two elementary directions, with this phenomenon being generalizable to <110> FCC nanowires of different materials (Cu, Au, Ni, Pd and Pt).The beat phenomenon is explained using a discrete moment of inertia model based on the hard sphere assumption, the model is utilized to show that surface effects enhance the beat phenomenon, while the effect is reduced with increasing nanowires cross-sectional size or aspect ratio.Most importantly, due to the existence of the beat phenomena, we demonstrate that in resonance experiments only a single frequency component is expected to be observed, particularly when the damping ratio is relatively large or very small.Furthermore, for a large range of actuation angles, the lower frequency is more likely to be detected than the higher one,which implies the experimental predictions of Young's modulus obtained from resonance may in fact be under predictions. The present study therefore has significant implications for experimental interpretations of Young's modulus as obtained via resonance testing.

Approaching the theoretical elastic strain limit in copper nanowires.

Atomistic Numerical Investigation of Single-crystal Copper Nanowire with Surface Defects

Atomistic Exploration of Deformation Properties of Copper Nanowires with Pre-Existing Defects

Molecular Dynamics Study Of Dynamic Buckling Properties Of Nanowires With Defects

Numerical Exploration of Plastic Deformation Mechanisms of Copper Nanowires with Surface Defects

In Situ Observation of High Bending Strain Recoverability in Au Nanowires

Advanced Numerical Characterization of Mono-Crystalline Copper with Defects

Strong Hall-Petch Type Behavior in the Elastic Strain Limit of Nanotwinned Gold Nanowires

Beat Phenomena in Metal Nanowires, and Their Implications for Resonance-Based Elastic Property Measurements.

Deformation of Copper Nanowire under Coupled Tension–Torsion Loading

MD Investigations for Mechanical Properties of Copper Nanowires with and Without Surface Defects

Surface Stress Effects On The Yield Strength In Nanotwinned Polycrystal Face-Centered-Cubic Metallic Nanowires

In situ nanomechanical measurement of Cu nanowires

Approaching the ideal elastic strain limit in silicon nanowires

Crystalline liquid and rubber-like behavior in Cu nanowires

Elastic and Plastic Deformations of Nickel Nanowires under Uniaxial Compression

In situ atomic-scale observation of continuous and reversible lattice deformation beyond the elastic limit

Quantitative evidence of crossover toward partial dislocation mediated plasticity in copper single crystalline nanowires.

An investigation of the combined size and rate effects on the mechanical responses of FCC metals

Theoretical and numerical investigation of bending properties of Cu nanowires

Strain in Semiconductor Core-Shell Nanowires