Abstract:As the advancement of deep earth energy engineering in the 21st century, the challenges imposed by dynamic loads and high temperatures will be increasingly regular. This paper studied the dynamic mechanical behaviors and fracture characteristics of defective red sandstone (single fissure inclination of 0°, 30°, 60°, and 90°) subjected to thermal treatments (25 °C, 200 °C, 400 °C, 600 °C, and 800 °C) under descending amplitude low cycle (DALC) impact loading. The experiments were conducted using a modified split Hopkinson pressure bar (SHPB) system, and the fracture surfaces of the failed specimens were characterized through the use of high-resolution 3D laser scanning to obtain point cloud data. Subsequently, the fractal, roughness, texture, and elevation features of fracture surfaces were analyzed using the boxing-counting method, grayscale co-occurrence matrix (GLCM), and elevation-based statistics. The scanning electron microscopy (SEM) was utilized to study the fracture micromorphology as well. Additionally, the mechanisms of damage and fracture evolution were discussed based on the results of X-ray diffractometry (XRD), synchronous thermal analysis (STA), discrete element method (DEM), and strain energy density theory. The results demonstrate that the peak stress and dynamic elastic modulus deteriorate with rising temperatures and increase with larger fissure angles. While the peak strain, strain rate, and peak stress increase factor (PIF) exhibit the opposite trend. The threshold values for the intensification of these events are 400 °C and 60°. The damage is dominated by tensile cracks, which transition to shear at 30° and 60° due to temperature dependence. Meanwhile, the fractal dimension (D C ), joint roughness coefficient (JRC), second-order statistics of GLCM, and elevation eigenvalues have been modeled using multiple regression analysis to investigate their interaction with temperature and fissure angle. The best-fit models illustrate significant linear or non-linear correlations between the aforementioned parameters and the mechanical parameters. Furthermore, the magnitude and distribution pattern of thermal cracks, as well as the growth of shear fractures, are governed by the dehydration, thermal expansion, phase transition, plasticization, thermal fracture, and thermal decomposition. Finally, strain energy density theory manifests promising prospects for understanding and predicting DALC impact fracture patterns of specimens.

Experimental study on the energy evolution law during crack propagation of cracked rock mass under impact loads

Analysis of energy dissipation and crack evolution law of sandstone under impact load

Dynamic Characteristics and Fractal Representations of Crack Propagation of Rock with Different Fissures under Multiple Impact Loadings

Dynamic energy evolution and fragmentation characteristics of damaged rock under impact compression loading

Experimental investigations of the dynamic mechanical properties and fracturing behavior of cracked rocks under dynamic loading

Damage of Sandstone Induced by Repetitive Impact Loading

Experimental Investigation of Pre-Flawed Rocks under Dynamic Loading: Insights from Fracturing Characteristics and Energy Evolution

Experimental study of energy dissipation characteristics and crack coalescence modes of cracked sandstone under different cyclic loading paths

Investigation of Microcrack Propagation and Energy Evolution in Brittle Rocks Based on the Voronoi Model

Effect of Loading Rate and Water on the Dynamic Fracture Behavior of Sandstone under Impact Loadings

Experimental Study on Dynamic Tensile Mechanical Behavior and Fracture Mechanical Characteristics of Sandstone with a Single Prefabricated Fissure

Experimental and numerical investigation of crack propagation and dynamic properties of rock in SHPB indirect tension test

Effect of reflected stress wave on dynamic crack propagation and arrest behavior of sandstone specimens under impact loading

Study on the mechanism of energy evolution and bearing degradation in pre-cracked sandstone under non uniform cyclic loading

An Experimental Investigation of the Progressive Failure of Sandstone and Its Energy Evolution Characteristics

Crack dynamic propagation properties and arrest mechanism under impact loading

Dynamic tensile behaviour under impact loading for rocks damaged by static precompression

Experimental Study on Dynamic Mechanical Characteristics and Energy Evolution of Sandstone under Cyclic Impact Loading

Experimental investigation of a fissured rock with thermal storage potential subjected to descending amplitude low cycle impacts

Crack Propagation and Fragmentation Characteristics of Single-Flawed Sandstone Samples under Different Loading Conditions

Damage evolution and constitutive model of the rock masses with non-penetrating cracks under repeated impact loading