Analysis of energy dissipation and crack evolution law of sandstone under impact load

Yi Luo,Gang Wang,Xinping Li,Tingting Liu,Abhay Kumar Mandal,Mingnan Xu,Kun Xu

DOI: https://doi.org/10.1016/j.ijrmms.2020.104359

IF: 6.849

2020-08-01

International Journal of Rock Mechanics and Mining Sciences

Abstract:<p>Based on the split Hopkinson pressure bar (SHPB) laboratory tests, the dynamic mechanical properties and failure mode of sandstone are analyzed, and a SHPB numerical model is established by particle flow code (PFC). The dynamic stress equilibrium, stress wave propagation, stress-strain characteristics and failure mode are analyzed, respectively, which verifies the effectiveness of the model. Then we studied the impact failure process form both mesoscopic cracks and energy point of views. The results show that microcracks are activated in large quantities with the increasing of strain rate. When the crack density reaches a certain degree, the interaction between the cracks can not be ignored. The failure mode gradually changes from local tension–shear damage mode to axial splitting failure mode and then to crushing failure mode. During the impact failure process, the energy is mainly consumed by the generation of the cracks and the friction caused by the slip of the particles, namely, broken dissipation energy. As the impact load increases, the broken dissipation energy density shows the high–speed growth and the low–speed growth stage successively with a double exponential growth pattern. The friction energy increases continually by a certain percentage, which indicates it should be considered during the analysis of fracturing process. Moreover, the dynamic strength and fragmentation degrees are closely related to energy dissipation density.</p>

engineering, geological,mining & mineral processing

What problem does this paper attempt to address?

The problem this paper attempts to address is the relationship between the dynamic performance and failure modes of sandstone under impact loading, and the energy dissipation and crack evolution patterns. Specifically, the study aims to reveal the dynamic mechanical behavior of sandstone under different strain rates, analyze the changes in its failure modes, and explore the intrinsic mechanisms of rock material instability from the perspectives of energy and micro-crack evolution.

### Main Research Content:
1. **Experimental Part**:
- Conduct impact compression tests on sandstone using a Split Hopkinson Pressure Bar (SHPB) apparatus.
- Analyze the dynamic performance and failure modes of sandstone.
- Establish an SHPB numerical model using Particle Flow Code (PFC2D) to verify the model's validity.

2. **Numerical Simulation Part**:
- Use the PFC2D discrete element method to study the energy dissipation and crack evolution patterns of sandstone under impact loading from a mesoscopic perspective.
- Analyze dynamic stress balance, stress wave propagation, stress-strain characteristics, and failure modes.

### Research Background:
- The instability and failure of rock materials are ultimately the result of energy-driven crack initiation, propagation, accumulation, and penetration.
- Previous studies have mainly focused on energy conversion and total absorbed energy, neglecting other forms of energy such as kinetic energy and frictional energy.
- The limitations of experimental techniques make it difficult to measure the dynamic damage behavior of rocks in real-time.

### Research Significance:
- Further reveal the intrinsic mechanisms of rock material instability from the perspectives of energy and crack evolution.
- Provide new perspectives and methods for the study of rock dynamic characteristics and failure modes.

### Main Findings:
- With the increase in strain rate, a large number of micro-cracks are activated, and the interaction between cracks becomes non-negligible when the crack density reaches a certain level.
- The failure mode gradually transitions from a local tensile-shear failure mode to an axial splitting failure mode, eventually developing into a crushing failure mode.
- During the impact failure process, energy is mainly consumed in the generation of cracks and friction caused by particle sliding, i.e., fracture dissipation energy.
- The density of fracture dissipation energy shows a double exponential growth pattern with the increase in impact load, with rapid growth followed by slow growth.
- Dynamic strength and degree of fragmentation are closely related to the density of energy dissipation.

Through these studies, the paper provides important theoretical basis and technical support for understanding the dynamic behavior of rock materials under impact loading.