Abstract:Mercury ions (Hg 2+ ) are one of the most physiologically toxic heavy metal ions in water. Developing adsorbents for separating and removing mercury ions from aquatic systems has important environmental and social significance. Owing to the hard-soft-acid-base interaction between mercury and sulfur (S) atoms, two-dimensional layered MoS 2 holds great promise in capture physiologically toxic Hg 2+ from water, but most S atoms are located inside the bulk MoS 2 , hindering the effective contact with mercury. Defects engineering is considered as an effective way to adjust the structure and achieve superior performance of MoS 2 . However, reasonable and fine defect modulation to enhance the mercury adsorption performance remains a challenging task. Herein, we reported that molybdenum sulfide with Mo-vacancy structure (MV-MoS x ) was fabricated via hydrothermal method and employed to uptake Hg 2+ . The results showed that this defect type significantly increased the concentration of Mo stripping defects, exposed more active S atoms, and provided MoS x with excellent adsorption performance in adsorption capacity , adsorption kinetics, distribution coefficient, selectivity and so on. In particular, MV-MoS x demonstrates a substantial actual adsorption capacity for mercury, reaching as high as 3723.3 mg/g, which is in close proximity to its theoretical adsorption capacity of 3945.95 mg/g. More importantly, a functionalized composite aerogel system based on MV-MoS x was constructed, which successfully reduced the concentration of Hg 2+ solution below the concentration permitted by drinking water standards. Our study not only provide a theoretical basis for the design of novel defect engineering, but also expand the application of transition metal sulfides in the enrichment and separation of heavy metal ions.

Efficient remediation of mercury-contaminated groundwater using MoS 2 nanosheets in an in situ reactive zone

Microwave-induced Activation of Additional Active Edge Sites on the MoS2 Surface for Enhanced Hg0 Capture

Practical Remediation of Hg-Contaminated Groundwater by MoS2: Batch and Column Tests

Integrated Dynamic and Steady State Method and Its Application on the Screening of MoS2 Nanosheet-Containing Adsorbents for Hg-0 Capture

In situ remediation of mercury-contaminated groundwater through an in situ created reactive zone enabled by carboxymethyl cellulose stabilized FeS nanoparticles

Synthesis of MoS2 nanosheets for mercury speciation analysis by HPLC-UV-HG-AFS

The Performance and Kinetics of Flower-Like MoS2 for Hg2+ Removal from Acidic Wastewater

Solidification/stabilization of Mercury Contaminated Soil by Geopolymer/mos2 Composites

Phase-mediated mercury removal from water using multilayered molybdenum disulfide: The key role of redox mechanism

Solidification/stabilization of mercury contaminated soil by geopolymer/MoS 2 composites

Highly effective remediation of Pb(II) and Hg(II) contaminated wastewater and soil by flower-like magnetic MoS2 nanohybrid

Effect of Natural Organic Matter (NOM) on the Removal Efficiency of Hg(II) by MoS2: Dependence on the Hg/MoS2 Ratio and NOM Properties

Mercury removal from syngas by metal oxides based adsorbent: A review

Rational construction of MoS x via defect engineering for efficient removal of mercury ions from aqueous solution

Green remediation of mercury-contaminated soil using iron sulfide nanoparticles: Immobilization performance and mechanisms, effects on soil properties, and life cycle assessment

Promoting mercury removal from desulfurization slurry via S-doped carbon nitride/graphene oxide 3D hierarchical framework

Remediation of Mercury Contaminated Soil, Water, and Air: A Review of Emerging Materials and Innovative Technologies

Self-Constructing 100% Water-Resistant Metal Sulfides through In Situ Acid Etching for Effective Elemental Mercury (Hg 0 ) Capture

Mercury removal from flue gas by a MoS2/H2O heterogeneous system based on its absorption kinetics

Effective removal of mercury from flue gas using flower-like MoS2 doped with rod-shaped MnO2

Remediation of sulfonamides-contaminated groundwater through in-situ activation of peroxymonosulfate by supported hierarchical CuO/MgO nanosheets