Abstract:Damage and failure in quasi-brittle materials such as rocks, concrete, and ceramics, have a complex non-linear behavior due to their heterogeneous character and the development of a fracture process zone (FPZ), formed by micro-cracking around the tip of an induced or pre-existing flaw. A softening behavior is observed in the FPZ, and the linear elastic fracture mechanic (LEFM) cannot correctly reproduce the stress field ahead of the crack tip. The existence of the FPZ may be the intrinsic cause of the size effect. An appropriate modeling of this process zone is mandatory to reproduce accurately the failure propagation and consequently, the structural behavior. Different from most of the domain numerical techniques, the boundary element method (BEM) requires (besides the boundary division into elements) only the discretization of a small region where dissipative effects occur. Cells with embedded continuum strong discontinuity approach (CSDA), placed in the region where the crack is supposed to occur, are capable of capturing the transition of regimes in the failure zone. Numerical bifurcation analysis, based on the singularity of the localization tensor, is used to determine the end of the continuum regime. Weak and strong discontinuity regimes are associated with diffuse micro-cracks (strain discontinuity) and macro-crack (displacement discontinuity). A variable bandwidth model is used during the weak discontinuity regime to represent the advance of micro-cracks density and their coalescence. Continuum and discrete cohesive isotropic damage models are used to describe the softening behavior. Analysis of three-dimensional problems with single crack in standard and mixed fracture modes, using this transitional approach and the BEM cells is firstly presented in this work. Experimental reference results are used to attest the capability of the approach in reproducing the structural behavior during crack propagation. Some necessary advances required for its applications for general complex structural problems are pointed out.

A note on stress intensity factors evaluation by J-Integrals in the Dual Boundary Element Method

DBEM computation of T-stress and mixed-mode SIFs using interaction integral technique

Path-independent Integral for Heterogeneous Media with Respect to Field Discontinuities

Computations of J-integral and T*-integral in elastic–plastic fracture by the quadrature element method

A new DBEM for solving crack problems in arbitrary dissimilar materials

Numerical evaluation of stress intensity factors and T-stress for interfacial cracks and cracks terminating at the interface without asymptotic enrichment

A novel application of recovered stresses in stress intensity factors extraction methods for the generalized/extended finite element method

Boundary element method: cells with embedded discontinuity modeling the fracture process zone in 3D failure analysis

An Improved Crack-Tip Element Treatment for Advanced FEMs

A general DBEM for mixed-mode cohesive crack problems

Investigation of the J -integral and SIFs by block-based Galerkin free element method

Integral Transform Approach For DynamicFracture Calculation And Crack GrowthModelling

Stress intensity factor analysis of interface cracks using X‐FEM

Simulation On Non-uniform Velocity DynamicCrack Growing By TDBEM

An extended isogeometric boundary element formulation for three-dimensional linear elastic fracture mechanics

On The J-Integral Concept For Elastic-Plastic Crack Extension

An interaction integral method coupled with special crack tip elements for evaluation of stress intensity factors

Investigation of Stress Intensity Factors for an Interface Crack in Multi-Interface Materials Using an Interaction Integral Method

Dislocation-based finite element method for calculating stress intensity factors of cracks

Theory and application of fracture analysis of interface crack using BEM

DSIF Computation of Dynamic Crack Growth with Non-Uniform Velocity by TDBEM