Abstract:Despite recent advances and improvements in modeling and prediction of the dynamics of the machining process, an efficient machining process is limited due to chatter and instability of machining system. In fact, the machining system contains various kinds of joints, which cause difficulties in dynamics modeling, simulation and prediction. Moreover, the flexible support system results in large deformation and violent vibration of the workpiece when machining, and the thin-walled workpiece easily gives rise to the chatter of the machining system. Therefore, the dynamics of the flexible support system was considered to calculate stability lobe diagram in the modeling of milling process. The whole machining system was regarded as a closed loop composed by the machine tool structures, support, workpiece and machining process. In this paper, the receptance coupling (RC) method was introduced to predict the dynamics of the closed machining system. A milling process was taken for example to predict the chatter limitations using the dynamics of closed model. The mathematical model of the machining system (machine tool structures, spindle, holder and tool), together with the details of joint contacts, was given based on the RC method. The RC model was used to obtain the dynamics of the system, while receptance of the tool point was coupled. Based on the coupling model of the machining system, the depth limitations under different speeds were estimated for the technology parameter optimization in milling process. The response was considered to be the sum of the cutting point and the support system. The flexibility of the support system was considered to be the feedback of the cutting stiffness. By this means, the traditional model was modified to calculate the stability lobe diagram based on the dynamics of the spindle and support system. Furthermore, the milling experiment was carried out to verify the prediction results, and the dominant natural frequencies of receptance at tool point were obtained by modal testing to define the stability lobe diagram. It was found that the chatter results matched well with the stability lobes. It was concluded that the support system with poor stiffness might cause violent chatter especially when the workpiece was thin-walled. The cutting depth limitations of the flexible support system were lower than that of the rigid one. Moreover, this closed model of the machining system is appropriate for the chatter prediction of the flexible support system or thin-walled workpiece, so it is helpful for a better parameter optimization.

Physics-supported Bayesian machine learning for chatter prediction with process damping in milling

On-line chatter detection and identification based on wavelet and support vector machine

A data-driven framework for predicting machining stability: employing simulated data, operational modal analysis, and enhanced transfer learning

Stability modeling for chatter avoidance in self-aware machining: an application of physics-guided machine learning

Robust Chatter Stability Prediction of the Milling Process considering Uncertain Machining Positions

Stability Prediction of Milling Process with Closed Machining System Dynamics with Flexible Thin-Walled Workpiece

Process damping identification using Bayesian learning and time domain simulation

Vision-Assisted Probabilistic Inference of Milling Stability through Fully Bayesian Gaussian Process

Milling Stability Prediction for Flexible Workpiece Using Dynamics of Coupled Machining System

Extenuating Chatter Vibration in Milling Process Using a New Ensemble Approach

Sensitivity Analysis and Monte Carlo Based Uncertainty Quantification of the In-process Modal Parameters in Milling

Automated machine tool dynamics identification for predicting milling stability charts in industrial applications

Time-varying dynamics updating method for chatter prediction in thin-walled part milling process

Chatter stability in robotic milling

Modeling dynamics and stability of variable pitch and helix milling tools for development of a design method to maximize chatter stability

Stability Analysis of Milling Based on the Barycentric Rational Interpolation Differential Quadrature Method

An Improved Tool Path Model Including Periodic Delay for Chatter Prediction in Milling

Stability and Control for Cutting Chatter Based on Active Magnetic Bearings

An efficient and precise stability analysis method for milling process

Prediction of time-varying dynamics and chatter stability analysis for surface milling of thin-walled curved CFRP workpiece

Chatter Stability Prediction of Ball-End Milling Considering Multi-Mode Regenerations