Abstract:LiFePO4 is the new generation cathode material for lithium ion batteries. To improve the powders’ pile density is considered as the important researching direction. One effective way is to prepare powders composed of spherical particles. Spherical amorphous FePO4·xH2O powders were synthesized by controlled crystallization method, using Fe(NO3)3, H3PO4 and NH3 as the raw materials. The FePO4·xH2O powders were pre-heat treated at 520°C for 20h in air to obtain spherical hexagonal FePO4 powders. The FePO4 powders were homogeneously mixed with Li2CO3, Cr(NO3)3 and sucrose with certain molar ratios, and then sintered at 800°C for 16h in N2. The spherical olivine Li0.97Cr0.01FePO4/C powders were finally obtained through carbothermal reduction process. The composition, structure, morphology, and physicochemical properties of FePO4·xH2O, FePO4 and Li0.97Cr0.01FePO4/C powders were characterized in detail by DTA/TGA, ICP, XRD, SEM, XPS, laser particle size analysis, and tap-density testing. It is observed the tap-density of the spherical Li0.97Cr0.01FePO4/C powders is as high as 1.8gcm−3, which is remarkably higher than the non-spherical LiFePO4 powders reported. At current of 0.005, 0.05, 0.1, 0.25 and 1.0C, the composite cathode materials have initial discharge specific capacity of 163, 151, 142, 131 and 110mAhg−1, respectively. The material also shows excellent cycling performance. The high-density spherical Li0.97Cr0.01FePO4/C cathode material can be used in the lithium ion batteries to greatly increase the batteries’ energy density. To further improve the material's pile density and rate capability is considered as the researching direction.

Synthesis research on iron phosphate with spherical structure and high tap density

Synthesis, morphological analysis and electrochemical performance of iron hydroxyl phosphate as a cathode material for lithium ion batteries

Preparation of Nano-spherical Iron Phosphate by Hydrothermal Method and Its Application as the Precursor of Lithium Iron Phosphate

The study on synthesis and modification for iron phosphate

The Transformation from Amorphous Iron Phosphate to Sodium Iron Phosphate in Sodium-Ion Batteries

Wet-process phosphoric acid for preparation of iron phosphate and its influence on performance of lithium iron phosphate synthesis

Preparation and Electrochemical Performance of Spherical LiFePO4

A versatile method for preparing FePO4 and study on its electrode performance in lithium ion batteries

Preparation and Characteristic of High-Density Spherical LiFePO4

Research on Preparation of Nano-porous Lithium Iron Phosphate for Lithium-ion Battery Electrode Materials

A novel environment-friendly synthesis of high purity micron iron phosphate and its application as a precursor of lithium iron phosphate

Preparation of Nanoscale Iron (III) Phosphate by Using Ferro-Phosphorus as Raw Material

Stability, electrochemical behaviors and electronic structures of iron hydroxyl-phosphate

Preparation and Characterization of High-Density Spherical Li0.97Cr0.01FePO4/C Cathode Material for Lithium Ion Batteries

Preparation of high purity iron phosphate based on the advanced liquid-phase precipitation method and its enhanced properties

Synthesis and electrochemical performance of amorphous hydrated iron phosphate nanoparticles

Synthesis of NaFePO4 by Spray Drying-Low Temperature Sintering and Corresponding Electrochemical Performance

Synthesis of FePO4·xH2O for Fabricating Submicrometer Structured LiFePO4/C by a Co-Precipitation Method

A synthesis route for lithium iron phosphate prepared by improved coprecipitation

Preparation and characterization of high density spherical Li {sub 0.97} Cr {sub 0.01} FePO {sub 4}/C cathode material for lithium ion batteries

Synthesis Of Fepo4 Center Dot Xh(2)O For Fabricating Submicrometer Structured Lifepo4/C By A Co-Precipitation Method