Abstract:The strain rate and temperature effects on the hydrogen embrittlement behavior of Fe-20Mn-20Ni-20Cr-20Co and Fe-30Mn-10Cr-10Co (at %) high-entropy alloys were investigated. The Fe-20Mn-20Ni-20Cr-20Co high-entropy alloy exhibits a mechanically stable face-centered cubic (FCC) structure. The as-annealed microstructure of the Fe-30Mn-10Cr-10Co high-entropy alloy consists of a metastable FCC phase with a thermally induced hexagonal close-packed (HCP) martensite. After hydrogen precharging in a 100-MPa hydrogen gas atmosphere, tensile tests were carried out on the two high-entropy alloys. The hydrogen increased the yield strength of both alloys. With the increase in strain rate from 10 –4 to 10 –2 s –1 , the yield strength of the hydrogen-charged Fe-20Mn-20Ni-20Cr-20Co alloy markedly increased, which indicates activation of the strengthening mechanism related to the thermal activation of dislocation motion associated with hydrogen atoms. In contrast, the strain rate effect on the yield strength was insignificant in the Fe-30Mn-10Cr-10Co alloy, where the FCC–HCP martensitic transformation dominated the onset of plasticity. In terms of failure, the combined hydrogen effects that increased the flow stress and decreased the work-hardening rate in the late deformation stage accelerated the occurrence of specimen necking, particularly at a high strain rate, e.g. 10 –2 s –1 at 20°C. In addition, the elongation of the hydrogen-charged Fe-20Mn-20Ni-20Cr-20Co and Fe-30Mn-10Cr-10Co alloys increased with the strain rate, which indicates that the hydrogen transport by dislocation motion in late deformation stages assisted both modes of cracking (along grain boundaries and HCP martensite plates) in high-entropy alloys, which resulted in hydrogen-induced intergranular fracture and quasi-cleavage fracture, particularly at relatively low strain rates. Importance of the hydrogen transport by dislocation motion for brittle fracture at 20°C was supported by the test results at –100°C: brittle fracture occurred at higher stress and larger strain as compared to the cases at 20°C for both alloys.

Effect of Mo doping on the gaseous hydrogen embrittlement of a CoCrNi medium-entropy alloy

Suppressing Hydrogen Embrittlement of a CrCoNi Medium-Entropy Alloy by Triggering Co-Segregation of Carbon, Boron, and Cr

Effects of interstitial C and N on hydrogen embrittlement behavior of non-equiatomic metastable FeMnCoCr high-entropy alloys

Enhanced Resistance to Hydrogen Embrittlement in a CrCoNi-based Medium-Entropy Alloy Via Grain-Boundary Decoration of Boron

Enhanced Resistance to Hydrogen Embrittlement in a CrCoNi-Based Medium-Entropy Alloy via Grain Boundary Engineering: A Case Study of Boron Segregation

Effect of hydrogen charging time on hydrogen embrittlement of CoCrFeMnNi high-entropy alloy

Effect of Hydrogen on Thermal Deformation Behavior and Microstructure Evolution of MoNbHfZrTi Refractory High-Entropy Alloy

Effect of Mo-doping on the stability of D022 superlattice and mechanical properties in the Ni2.1CoCrFeNb0.2 high entropy alloy

Effect of Mo Content on Microstructure and Mechanical Properties of CoCrFeNi Series High-entropy Alloys

Hydrogen-assisted failure in partially recrystallized carbon alloyed equiatomic CoCrFeMnNi high-entropy alloy

Effect of Mo on the Mechanical and Corrosion Behaviors in Non-Equal Molar AlCrFeMnNi BCC High-Entropy Alloys

Mo Content-Dependent Hardness and Microstructural Evolution of CoCrNiMox Medium Entropy Alloys

Influence of hydrogen behaviors on tensile properties of equiatomic FeCrNiMnCo high-entropy alloy

Partially Recrystallized Heterostructure Via Mo-doping Endows CoCrNi Medium-Entropy Alloy with Exceptional Strength and Ductility

Superior hydrogen embrittlement resistance of CoCrNi-based medium-entropy alloy via coherent precipitation and grain boundary strengthening

EFFECT OF MOLYBDENUM ON DELAYED FRACTURE BEHAVIOR OF HIGH STRENGTH STEEL

Experimental Investigation of the Effect of Hydrogen on Fracture Toughness of 2.25Cr-1Mo-0.25v Steel and Welds after Annealing

Deciphering the effect of W and Mo co-additions on recrystallization behavior and strengthening mechanism of CrCoNi medium entropy alloy

Mo content-dependent hardness and microstructural evolution of CoCrNiMo x medium entropy alloys

Strain Rate and Temperature Effects on Hydrogen Embrittlement of Stable and Metastable High-Entropy Alloys

Effects of Mo Element on Microstructure and Mechanical Properties of CoCrFeMnNi High Entropy Alloys