Abstract:The large 2400 MWth Gas-cooled Fast Reactor (GFR) is one of the most promising advanced reactor concepts currently being investigated within Generation IV. The current work presents the three-dimensional simulation and analysis of GFR core behavior related, primarily, to control assembly (CA) fast movements and/or to accidental withdrawals/ejections. These two categories of events differ in the speed at which the CA is removed. The transient analysis is focused on two different GFR core designs: (1) the reference design (“2004-Core”) and (2) a variant design (“2007-Core”), the main difference being in the core geometry, i.e., in the height-to-diameter (H/D) ratio (2.35 m for the latter core, compared to 1.55 m for the reference design). The reported work firstly concerns the development and benchmarking of coupled, full-core 3D neutron kinetics (NK) and 1D thermal-hydraulics (TH) models for both GFR designs. The models were developed using the TRACE and PARCS codes, which form part of the FAST code system applied at PSI for the generic analysis of advanced fast-spectrum systems. The neutronics is simulated in the nodal diffusion approximation, in conjunction with spatial kinetics. In the TH model, each of the fuel subassemblies (SAs) is modeled individually, so that one can accurately track changes in the thermal-hydraulic-channels surrounding the control assemblies. Consistent nodalization schemes are used in the TH and NK models, in order to provide a 1:1 mapping. Using the developed coupled models, spatial effects have been studied for a variety of hypothetical CA driven transients. Asymmetric CA ejections (speed ∼ 4 cm/s) and withdrawals (speed ∼ 2 mm/s) were analyzed, and large spatial deformations of the power map (up to +21%, relative to average fission power in the TH channels adjacent to the ejected CA) were observed. The analysis has clearly brought out the importance of 3D spatial effects, in the context of the correlation between CA-worths and the loose neutronic coupling of core regions in the case, for example, of a low-H/D core. A sensitivity study of the spatial effects to different parameters (e.g., number of assemblies being ejected and the CA speed) has been conducted, in order to fully characterize the GFR dynamic response. Furthermore, comparisons between the GFR core variants were made. Lower temperatures (fuel, clad and coolant) and lower spatial effects were obtained for the second core. Based upon the results obtained, no major safety-related problem has been found as regard to the CA pattern developed for the GFR. In order to limit the spatial effects, the CAs have to be moved either independently or in symmetric configurations, e.g., three CAs with 120°C symmetry.Copyright © 2009 by ASME

Evaluation of reflector design of ALLEGRO refractory core

Study of the Allegro Core Performance

Full Core Criticality Modeling of Gas-Cooled Fast Reactor using the SCALE6.0 and MCNP5 Code Packages

Allegro: The European Gas Fast Reactor Demonstrator Project

Improvements to the Baff-Refl Equivalence Technique Applied to Reflector Models in PWRs

ALLEGRO Core Degradation Study using MELCOR 2.1

Initial Multidisciplinary Study of Oxidized Chromium-Coated Zirconium Alloy for Fuel Cladding of SCW-SMR Concept: Weight-Gain and Thermal Conductivity Measurements and Coating Cost Evaluation

GAS-COOLED FAST REACTOR-ALLEGRO DECAY HEAT REMOVAL STUDIES

Neutronic and Thermal-Fluidic Analyses for an Additive Manufactured Reactor with SiC Matrix and TRISO Particle Fuel

Comparison of neutronic aspects in high‐temperature gas‐cooled reactor using ZrC and SiC Triso particle with 50 and 100 MWt power

Modular gas-cooled reactor core optimal design and additive manufacturing performance based on SiC matrix dispersed with TRi-structural ISOtropic fuel

Three-Dimensional Core Behaviour Analysis of the Gas-Cooled Fast Reactor (GFR) During Hypothetical Control Assembly Withdrawal Accidents

Conceptual Design and Feasibility Analysis of a Modular Supercritical CO2 Fast Reactor Core

Study of energy deposition in the coolant of LFR

ANALYSIS OF CORE CONFIGURATION FOR CONCEPTUAL GAS COOLED FAST REACTOR (GFR) USING OPENMC

Neutronic Assessment of Candidate Materials for TF Coils Shielding in a DEMO Fusion Reactor Based on a DCLL Blanket

A neutronic comparative study of reflectors in radially and axially heterogeneous cores for the ABR-1000 sodium cooled fast reactor

Preliminary Characterization of Alumina-Forming Austenitic–Type Advanced Alloys as Structural Materials for LFRs

The AGR-like FHR reactor: Assessing the technical limits of the fuel

Comparative analysis of different FeCrAl alloys in pressurized water reactors

Advanced Structural Materials for Gas-Cooled Fast Reactors—A Review