Abstract:<span><b>Abstract</b>The flouride-salt-cooled high-temperature reactor (FHR) uses graphite-matrix coated-particle fuel [the same as high-temperature gas-cooled reactors (HTGRs)] and a clean liquid salt coolant. It delivers heat to the industrial process or the power cycle at temperatures between 600°C and 700°C with average heat delivery temperatures higher than for other reactors. The melting point of the liquid salt coolant is above 450°C. The high minimum temperatures present refueling challenges and require special features to control temperatures, avoiding excessively high temperatures and freezing of the coolant that could impact decay heat cooling systems. This paper describes a preconceptual FHR design that addresses many of these challenges by adopting features from the British advanced gas-cooled reactor (AGR) and alternative decay heat cooling systems. The bases for specific design choices are described.The AGRs are carbon dioxide–cooled and graphite-moderated reactors that use cylindrical fuel subassemblies with vertical refueling at 650°C, which meets the FHR high-temperature refueling requirements. Fourteen AGRs have operated for many decades. The AGR uses eight cylindrical fuel subassemblies, each 1 m tall coupled axially together by a metal stringer to create a long fuel assembly. The stringer assemblies are in vertical channels in a graphite core that provides neutron moderation. This geometric core design is compatible with an FHR using graphite-matrix coated-particle fuel. The FHR uses a once-through fuel cycle. The design minimizes used nuclear fuel volumes relative to other FHR and HTGR designs. The primary system is inside a secondary liquid salt–filled tank that (1) provides an added heat sink for decay heat, (2) helps to ensure no freezing of primary system salt, and (3) helps to ensure no major fuel failures in a beyond-design-basis accident. The refueling standpipes above each stringer fuel assembly in the AGR core with modifications can be used in an FHR for refueling and can provide efficient heat transfer between the primary system and the secondary liquid salt–filled tank. The passive decay heat removal system uses heat pipes that turn on and off at a preset temperature to avoid overheating the core in a reactor accident and to avoid freezing the salt coolant as decay heat decreases after reactor shutdown.</span>

The AGR-like FHR reactor: Assessing the technical limits of the fuel

Extending TRANSURANUS burnup model for AGR-like FHR fuel design

Fluoride-Salt-Cooled High-Temperature Reactor (FHR) Using British Advanced Gas-Cooled Reactor (AGR) Refueling Technology and Decay Heat Removal Systems That Prevent Salt Freezing

Physics Evaluation of Alternative Uranium-Based Oxy-Carbide Annular Fuel Concepts for Potential Use in Compact High-Temperature Gas-Cooled Reactors

High-Fidelity Neutronics and Thermal-Hydraulics Analysis of Helical Cruciform Fuel Based on Small Modular Fhr

Preliminary Prediction for Survival Time of Fuel Rod under Critical Heat Flux

Neutronic Design and Evaluation of a PWR Fuel Assembly with Accident Tolerant-Fully Ceramic Micro-Encapsulated (AT-FCM) Fuel

Accident Tolerant Fuels (fecral Cladding & Coating) Performance Analysis in Boiling Water Reactor (BWR) by the MELCOR 1.8.6 UDGC

Neutronics and Thermo-Fluids Simulation of Generic Pebble-Bed Fluoride-Salt-Cooled High-Temperature Reactor

Full Core Criticality Modeling of Gas-Cooled Fast Reactor using the SCALE6.0 and MCNP5 Code Packages

Thermal-hydraulics/thermal-mechanics temporal coupling for unprotected loss of flow accidents simulations on a SFR

Observations of high burnup structure in AGR fuel

Preliminary Characterization of Alumina-Forming Austenitic–Type Advanced Alloys as Structural Materials for LFRs

Enhancing cladding mechanical modelling during DBA/LOCA accidents with FRAPTRAN: The TUmech one-dimensional model

Development of the FHR Advanced Natural Circulation Analysis Code and Application to FHR Safety Analysis

RELAP5 MOD3.2 Modification and Application to the Transient Analysis of a Fluoride-Salt-cooled High-Temperature Reactor

Preliminary Neutronic/thermal-Hydraulic Evaluation and Safety System Optimization of PWR Loaded with Fully Ceramic Microencapsulated Fuel

Neutronic Analysis of Thorium Nitride (Th, U233)N Fuel for 500MWth Gas Cooled Fast Reactor (GFR) Long Life without Refueling

Preliminary Neutronic and Thermal-Hydraulic Analysis of a 2 MW Thorium-based Molten Salt Reactor with Solid Fuel

Transient Safety Analysis of A Transportable Fluoride-Salt-Cooled High-Temperature Reactor Using Relap5-3d

Neutronic analysis of high burnup thorium-HALEU fuels in PHWR