Abstract:The goal of this study is to improve a micro reactor core into uniform power distribution, a smaller and safer core. Neutronic thermal-hydraulics coupling is an effective means to study the characteristics of microreactors. This paper performs an improvement work of lead–bismuth eutectic alloy (LBE) cooled solid core using the three-dimensional neutronics/thermal-hydraulics coupling method. Based on the Monte Carlo code RMC and the three-dimensional thermal-hydraulics code STAR-CCM+, the coupling code processes the power distribution, fuel temperature, coolant temperature, and coolant density. The improvement of the solid core is carried out in these aspects: reflector material, reflector dimensions, fuel materials, coolant channel dimensions, the volume fraction of fuel phase in dispersion fuel, and critical enrichment. This paper studies the effect of reflector material and dimensions on the solid core and its mechanism. After improvement, the power peaking factor is effectively reduced, while the size and weight of the solid core are also reduced than before due to the excellent ability of beryllium oxide (BeO), making it compact and lightweight. In addition, the core eigenvalues k eff and thermal characteristics of different ceramic fuels, uranium dioxide (UO 2 ), uranium nitride (UN), and uranium carbide (UC), are compared. UO 2 was replaced by UN, which improves the thermal conductivity and reduces the maximum temperature of the solid core. At the same pressure difference, the mass flow rate of the coolant and temperature distribution of the fuel and the variation trend of neutron characteristics are studied when the coolant channel diameter changes. The results indicate that the coolant channel diameter of 1.775 cm has the best safety effect on the core. The variation of critical enrichment and thermal conductivity of the fuel at different volume fractions is compared, and 60 % is chosen as the volume fraction of the fuel phase. The final design of the shutdown rod and control drums is performed to ensure that the core is subcritical under all conditions. The improved core can operate at full power for five years and is characterized by miniaturization, high thermal conductivity, low volumetric swelling rate, flattened power distribution, and abundant reactivity control measures.

A neutronic comparative study of reflectors in radially and axially heterogeneous cores for the ABR-1000 sodium cooled fast reactor

Neutronic Evaluation of LWR Based SMR with TRU Fuel and Comparison with Different Core Configuration of UO2 and MOX Fuel

Comparative analysis of physical characteristics of coolant/moderator material used in micro-nuclear reactor

The Impact of Isotopic Composition of Lead on the Neutron-Physical Characteristics of Fast Reactor with Liquid Metal Coolant

Block Radial Basis Function Collocation Meshless Method Applied to Steady and Transient Neutronics Problem Solutions in Multi-Material Reactor Cores

The effect of heavy reflector on neutronic parameters of core

Comparative analysis between homogeneous and heterogeneous models of gas cooled fast reactor core (GFR-2400)

Improvements to the Baff-Refl Equivalence Technique Applied to Reflector Models in PWRs

Reactivity comparison of beo and mo for movable reflector control of a compact high-temperature fast reactor

Neutronic Analysis on Molten Salt Reactor (MSR) Using OpenMC Code With Variations of Geometry Core Fueled By LiF-BeF2-UF4

Investigation on Radioisotopes Evolution in the Fuel of Lead-Bismuth Eutectic (LBE) Cooled SPARK-NC Core

Effect of Radial Neutron Reflector on the Characteristics of Nuclear Fuel Burn-Up Wave in a Fast Neutron Energy Spectrum Multiplying Medium: A Consistent Parametric Approach

Research on fission and fusion neutron shielding performance of various materials

Analysis of nuclear reactions and material damage on neutron absorbers using the HANARO research reactor

Neutronic Analysis of Accident‐Tolerant Cladding Materials in 3D Full Core BEAVRS PWR Benchmark Using OpenMC Code

Neutronics Effects of Homogeneous Model on Solid Breeder Blanket of CFETR

Improved design of LBE cooled solid reactor using 3D neutronics thermal-hydraulics coupling method

Comparison and sensitivity analysis of the core characteristics of a sodium-cooled fast breeder reactor with 750 MWe output evaluated by JENDL-4.0 and ADJ2000R

Neutronic/Thermal-Hydraulic Design Features Of An Improved Lead-Bismuth Cooled Small Modular Fast Reactor

Neutronics analysis of the spatial separation of fuel in lithium cooled space fast reactors

Evaluation of reflector design of ALLEGRO refractory core