Isothermal experiments on steam oxidation of magnetron-sputtered chromium-coated zirconium alloy cladding at 1200 °C
Dong Wang,Ruhao Zhong,Yapei Zhang,Peng Chen,Yicong Lan,Jian Yu,G.H. Su,Suizheng Qiu,Wenxi Tian
DOI: https://doi.org/10.1016/j.corsci.2022.110544
IF: 7.72
2022-09-01
Corrosion Science
Abstract:The isothermal steam oxidation behavior of chromium-coated zirconium alloy cladding at 1200 °C is studied. The cladding substrate is Zr-1 Nb alloy with outer diameter of 9.5 mm and thickness of 0.57 mm. The Cr coating is prepared by magnetron sputtering method with thickness of about 11 μm. The oxidation durations are 300 s~14,400 s. After oxidation, blisters are formed on the surface due to the compressive stress in coating, and the coating surfaces are porous or exhibit a morphology with ravines and granular crystals. A four-layer structure (Cr2O3, Cr, Zr(Cr,Fe)2 and Zr from outside to inside) is formed in the early stage of oxidation. However, Zr4+ can migrate into Cr coating through grain boundaries and reacts with Cr2O3. The redox reaction between Zr and Cr2O3 leads to the coating failure, resulting in the oxidation of Zr alloy substrate. Due to selective oxidation, a certain thickness of Cr coating is retained during the thickening of outer ZrO2. The emergence of outer ZrO2 layer is significantly delayed by Cr coating, and Cr coating is able to reduce the growth rate of outer ZrO2 layer. Therefore, Cr coating has a protective effect in 1,200 °C steam environment and can improve the oxidation resistance of Zr alloy cladding.
materials science, multidisciplinary,metallurgy & metallurgical engineering