Abstract:Crystalline silicon as an anode material for lithium-ion batteries (LIBs) has a theoretical capacity greater than 3600 mAh/g, an order of magnitude larger than the current anode materials of choice, graphite (~370 mAh/g). However, the use of silicon is hampered by several issues that hinder its widespread usage in LIBs. Chief among these is the large volume expansion that accompanies lithiation (>300%), which results in the self-pulverization of silicon during cycling and the degradation in stability and performance that accompanies it. Silicon also suffers from active lithium loss in its first cycle from the formation of Li x Si and the solid-electrolyte interphase (SEI), which irreversibly consumes lithium and decreases gravimetric/volumetric capacity (typically >20% capacity loss after the formation cycle). This capacity loss coupled with mechanical and chemical degradation leads to poor capacity retention and short cycle life. Pre-lithiation of silicon and other potential anode materials ( e.g. SiO x ), a process of inserting additional Li into Si prior to battery operation, is thus desired to compensate for lithium consumption and to maintain the high capacity associated with silicon. Here, we demonstrate a simple and scalable method for the ex situ ( i.e. outside the cell) electrochemical synthesis of pre-lithiated silicon. In this method, a current is driven though an electrochemical stir-tank reactor composed of Si powder in electrolyte suspension and a Li containing anode. When Si particles contact the conductive inner surface of the reaction vessel, lithium ions in the electrolyte are reduced on the surface to form lithium-silicon compounds. The degree of lithiation is controlled by the applied current density, applied voltage, and/or runtime. This talk will describe the chemical and structural characteristics of pre-lithiated silicon synthesized with this technique, basic electrochemical properties of our lithiated material, and the specific advantages presented by the method vs other methods.

Self‐Adapting Electrochemical Grinding Strategy for Stable Silicon Anode

Facilitating prelithiation of silicon carbon anode by localized high‐concentration electrolyte for high‐rate and long‐cycle lithium storage

Tailoring chemical composition of solid electrolyte interphase by selective dissolution for long-life micron-sized silicon anode

Anodes for Li-ion batteries prepared from microcrystalline silicon and enabled by binder's chemistry and pseudo-self-healing

Favored Amorphous LixSi Process with Restrained Volume Change Enabling Long Cycling Quasi‐solid‐state SiOx anode

Rectifying Solid Electrolyte Interphase Structure for Stable Multi-Dimensional Silicon Anodes

Impact of Electrolyte on Direct-Contact Prelithiation of Silicon-Graphite Anodes in Lithium-Ion Cells with High-Nickel Cathodes

Multi-strategy Synergistic In-Situ Constructed Gel Electrolyte-Binder System for High-Performance Lithium-Ion Batteries with Si-based Anode

Electrolyte Design Enabling a High‐Safety and High‐Performance Si Anode with a Tailored Electrode–Electrolyte Interphase

Low-cost silicon cutting waste reused as a high-power-density silicon-based anode

A self-driven alloying/dealloying approach to nanostructuring micro-silicon for high-performance lithium-ion battery anodes

A Steric-Hindrance-Induced Weakly Solvating Electrolyte Boosting the Cycling Performance of a Micrometer-Sized Silicon Anode

Dynamic Mechanical Equilibrium of Silicon Anodes for Lithium-ion Batteries Enabled by Surface Hydroxyl-Rich Bonding

Stabilizing the Bulk-Phase and Solid Electrolyte Interphase of Silicon Microparticle Anode by Constructing Gradient-Hierarchically Ordered Conductive Networks

A Uniform Self‐Reinforced Organic/Inorganic Hybrid SEI Chelation Strategy on Microscale Silicon Surfaces for Stable‐Cycling Anodes in Lithium‐Ion Batteries

In Situ Constructing of Rigid‐Soft Coupling Solid–Electrolyte Interphase on Silicon Electrode toward High‐Performance Lithium Ion Batteries

(Digital Presentation) Ex Situ Electrochemical Pre-Lithiation of Silicon for Lithium-Ion Battery Anodes

Improving Electrochemical Performance of Thick Silicon Film Anodes with Implanted Solid Lithium Source Electrolyte

Self-swelling derived frameworks with rigidity and flexibility enabling high-reversible silicon anodes

In Situ Growth of Silicon Carbide Interface Enhances the Long Life and High Power of the Mulberry-Like Si-based Anode for Lithium-Ion Batteries

An Energy Dissipative Binder for Self‐Tuning Silicon Anodes in Lithium‐Ion Batteries