Abstract:Silicon-based materials have been considered potential anode materials for next-generation lithium-ion batteries based on their high theoretical capacity and low working voltage. However, side reactions at the Si/electrolyte interface bring annoying issues like low Coulombic efficiency, sluggish ionic transport, and inferior temperature compatibility. In this work, the surface Al2O3 coating layer is proposed as an artificial solid electrolyte interphase (SEI), which can serve as a physical barrier against the invasion of byproducts like HF(Hydrogen Fluoride) from the decomposition of electrolyte, and acts as a fast Li-ion transport pathway. Besides, the intrinsically high mechanical strength can effectively inhibit the volume expansion of the silicon particles, thus promoting the cyclability. The as-assembled battery cell with the Al2O3-coated Si-C anode exhibits a high initial Coulombic efficiency of 80% at RT and a capacity retention ratio up to approximate to 81.9% after 100 cycles, which is much higher than that of the pristine Si-C anode (approximate to 74.8%). Besides, the expansion rate can also be decreased from 103% to 50%. Moreover, the Al2O3-coated Si-C anode also extends the working temperature from room temperature to 0 degrees C-60 degrees C. Overall, this work provides an efficient strategy for regulating the interface reactions of Si-based anode and pushes forward the practical applications at real conditions. In this work, the Al2O3 surface coating layer is proposed as an artificial solid electrolyte interphase (SEI), which serves as a physical barrier against the invasion of byproducts like HF(Hydrogen Fluoride) from the decomposition of electrolyte, and acts as a fast Li-ion transport pathway. Moreover, the Al2O3-coated Si-C anode also extends the working temperature from room temperature to 0 degrees C-60 degrees C.image

Electrolyte Design Enabling a High‐Safety and High‐Performance Si Anode with a Tailored Electrode–Electrolyte Interphase

Rational Electrolyte Design for Interfacial Chemistry Modulation to Enable Long‐Term Cycling Si Anode

Reversible Silicon Anodes Enabled by Fluorinated Inorganic-Organic Hybrid Coating

High‐Performance Silicon Anodes Enabled By Nonflammable Localized High‐Concentration Electrolytes

Rational Design of an In-Build Quasi-Solid-state Electrolyte for High-Performance Lithium-Ion Batteries with the Silicon-Based Anode

Tailoring a Multifunctional, Boron and Fluoride-Enriched Solid-Electrolyte Interphase Precursor Towards High-Rate and Stable-Cycling Silicon Anodes

Fluorinated Solvent‐Coupled Anion‐Derived Interphase to Stabilize Silicon Microparticle Anodes for High‐Energy‐Density Batteries

Tailoring chemical composition of solid electrolyte interphase by selective dissolution for long-life micron-sized silicon anode

A Uniform Self‐Reinforced Organic/Inorganic Hybrid SEI Chelation Strategy on Microscale Silicon Surfaces for Stable‐Cycling Anodes in Lithium‐Ion Batteries

Interphasial Pre-lithiation and Reinforcement of Micro-Si Anode through Fluorine-free Electrolytes

Robust and Fast‐Ion Conducting Interphase Empowering SiO x Anode Toward High Energy Lithium–Ion Batteries

Dynamic Mechanical Equilibrium of Silicon Anodes for Lithium-ion Batteries Enabled by Surface Hydroxyl-Rich Bonding

Electrolyte Design Enabling Stable Solid Electrolyte Interface for High-Performance Silicon/Carbon Anodes

Electrolyte design for LiF-rich solid–electrolyte interfaces to enable high-performance microsized alloy anodes for batteries

Interface Engineering Enables Wide-Temperature Li-Ion Storage in Commercial Silicon-Based Anodes

2D Solid‐Electrolyte Interphase Built by High‐Concentration Polymer Electrolyte for Highly Reversible Silicon Anodes

Self-Constructed Intimate Interface on a Silicon Anode Enabled by a Phase-Convertible Electrolyte for Lithium-Ion Batteries

Solid Interfacial Conversion Based on Fluorine-Silicon Reaction Enables Long-Term Cycling of Full Cells with Silicon Anode

Robust and Fast‐Ion Conducting Interphase Empowering SiOx Anode Toward High Energy Lithium–Ion Batteries

In Situ Constructing of Rigid‐Soft Coupling Solid–Electrolyte Interphase on Silicon Electrode toward High‐Performance Lithium Ion Batteries

Interface engineering of Si-based anodes with fluorinated binder enabling lean-additive lithium-ion batteries